ITP Delta Steel Wheel Question - Yamaha Rhino Forum - Rhino
Wheels and Tires For discussion of wheels and tires

LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 08-03-2019, 02:14 PM Thread Starter
Join Date: Aug 2019
Posts: 1
ITP Delta Steel Wheel Question

Okay I realize that most of you guys are running Rhino's off road, I'm one of those people who use mine for street only use and currently have 12" wheels (2008 Sport 700). I do run street tires on it in the OEM size but I want to put a set of 14" wheels on this thing so I can run passenger car tires and stop spending $$$$ on expensive tires that don't last, especially the steer tires.

What I'm looking to do is to install a set of ITP Delta's that are 14x7 with a 2" backspace (I'm not sure what that means). I did have the factory recall done years ago that supposedly widened the rear I'm guessing using spacers. My first question is will these wheels work (link below). And secondly if they will what size car tire will fit on them.

Thanks for your help, I'm pretty ignorant regarding this thing when it comes to wheels and tires.
JWHunnicutt is offline  
Sponsored Links
post #2 of 3 (permalink) Old 08-04-2019, 07:56 PM
Sunday Driver
Join Date: Jul 2014
Posts: 40
I would say it means the center is set in 2" from the back of the rim. 7" is going to allow a relatively wide tire. A 215 series tire is close to 8.5" wide. Look at the stock wheel and see what the offset is.
FlatlanderRhino is offline  
post #3 of 3 (permalink) Old 08-12-2019, 08:03 PM
Slow Poke
bearskinner's Avatar
Join Date: Jul 2009
Posts: 33
You can purchase DOT approved tires that are slightly less aggressive than pure off road tires, but the rubber compound is like a street tire. It is made to run on pavement. They handle good, without the noise and wander you get from a pure off road tire. The big plus is they last.
bearskinner is offline  

  Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino > Technical > Wheels and Tires

Quick Reply

Register Now

In order to be able to post messages on the Yamaha Rhino Forum - Rhino forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome