Yamaha Rhino Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
671 Posts
it has been my experience that if you change one thing then you break or bend another i.e. rack & HD rods break spindles / spindles break / bend rods & even racks

after replacing 4 racks & about 4-5 spindles per side doing one thing or the other I now have Gear One Rack & Rods, Cognito Spindles ( bullet proof (so far) )

Just get it all or nothing, the weakest thing is the rod ends and their fairly cheap to replace
 
1 - 2 of 2 Posts
Top