Yamaha Rhino Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter · #1 · (Edited)
I bent the circlip on the stock front CV on the diff side(inboard). It's the larger retaining ring that holds in the bearings and snaps into the bearing cup (approximately 3" in diameter). Please let me know if anyone has one lying around.

Thank you.
 

·
Registered
Joined
·
187 Posts
Discussion Starter · #4 ·
I should have been more descriptive about the part I need, thanks for everyone's help so far.

I need the large circlip (about 2 1/2" in diameter) that holds the bearing assembly in the cv on the differential side of the axle. I may need to find someone that has a stock cv for sale but thought I'd throw this out there before I go that route.

Thanks,
carl
 

·
Registered
Joined
·
1,183 Posts
I should have been more descriptive about the part I need, thanks for everyone's help so far.

I need the large circlip (about 2 1/2" in diameter) that holds the bearing assembly in the cv on the differential side of the axle. I may need to find someone that has a stock cv for sale but thought I'd throw this out there before I go that route.

Thanks,
carl
I have it
 

·
Registered
Joined
·
1,640 Posts
I might have one.
 

·
Registered
Joined
·
1,640 Posts
Damit Carl, I threw it out with the old CV, sorry about that!
 
1 - 8 of 8 Posts
Top