Yamaha Rhino Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
581 Posts
I think you are on the right track with the middle drive gear. If you plan on splitting the cases there is no reason not to install it. There is always the question of wether to 686 or not. I believe that a 686 can be just as reliable as stock if setup correctly. The additional tq and hp are always nice. If by chance your crank needs a freshining I would recommend rebuilding it with a HD rod. I will say be cautious with electric fuel pumps as I have seen many fail. If you do plan to use one make sure that it is not a magnetic pump like a Facet as they fail most commonly in off0road environments. A better oprion would be the Mikuni Hi flow upgrade that we and many others offer. Let me know if you would like me to make you an estimate for the standard parts needed to do a rebuild.

Nate
Alba Racing
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top