Yamaha Rhino Forum banner
1 - 20 of 39 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter · #1 · (Edited)
2006 Rhino 1317 miles 121 Hours
2010 Rotax 800 from Outlander
Doebeck EJK Programmer
Muzzy Dual Exhaust
Dalton Clutch Kit
TCP Triple Pass Radiator with Fan
TCP Oil Cooler with Fan and air deflector
Oil Temp gauge and fan switch
Coolant temp gauge and aux fan switch
Wire harness with all options from livnlo
Dual Odyssey batteries
HID Stock Replacement Headlights (new still in box)
Battery Disconnect
Commander Dipstick Extension (works awesome)
Half Windshield
Belt intake snorkel
Rotax your Rhino (RYR) Aluminum Fuel Cell
RYR Engine Mount Kit
RYR Thru Shaft

I bought this last year with 700 miles on it for $11,000. I have put on just over 600 miles on it. The swap was also completed in 2011.

I have added:
AFE underhood air intake with 3" tubing. $425
New engine cover $80
AEM AFR gauge $135
New rear drive shaft with CV joint $435

With stock shocks, rims/tires, and no rear cage and seat, I would like to get my $11,000 back out of it. I have added $1075 worth of stuff that will go with it for free.

Additional Stuff that can be left on for additional cost:

Progressive 425 HD Shocks $400
STM Rage 6 and Tuner Secondary $1900
UTV Inc Rear Cage and Seat $900
26" Bighorn 2.0 and ITP Beadlocks $400

With the airfilter on the throttle body this is faster than the 1000 commanders, with the underhood airfilter it is 3 lenghts behind due to the longer intake track and no plenum. It is much quiter with the intake up front. Adam cell 989-621-980six.

Pics to follow.
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #4 · (Edited)
Click for Video of start up and walk around to exhaust:



 

·
Registered
Joined
·
352 Posts
What's the top speed? Do u have stock motor?
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #6 ·
70-76 Mph depending what combo is on it.

No stock motor.
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #7 ·
Well if someone wanted to have this done to their Rhino it would cost more than what I am asking... :eek5: so you are getting the Rhino for free..

RHINO 800 MOTOR SWAP PRICING
THRU SHAFT$499.00
THRU SHAFT SEAL$16.99
MOTOR MOUNTS*$450.00
SHIFT LINKAGE MODIFICATION*$175.00
WIRE HARNESS MODIFICATION*$550.00
DRIVE LINE MODIFICATIONS*$295.00
THROTTLE CABLE MODIFICATION*$40.00
EXHAUST MODIFICATION*$295.00
AUXILIARY FUEL TANK*$350.00
RENEGADE DASH MOUNT$120.00
RENEGADE GAUGE$284.99
DALTON CLUTCH KIT$249.99


PRICE OF INSTALL (CUST. SUPPLIES MOTOR)$4,200.00

INSTALL WITH MOTOR PACKAGE ONLY (WE KEEP EXTRA ATV PARTS)$13,500.00

INSTALL WITH CUST. KEEPING ATV$14,500.00

Desert Dog off-road - Bombardier dealer, Quad and Utility Sport Quad sales, Sea-Doo
 

·
Registered
Joined
·
1,287 Posts
He posted he wanted his 11K out of it.
 

·
Registered
Joined
·
980 Posts
Is this the one on youtube doin the wheelies on concrete? I know its not related to the sale but it looks the same..


Good luck with the sale
 

·
Registered
Joined
·
1,319 Posts
Is this the one on youtube doin the wheelies on concrete? I know its not related to the sale but it looks the same..


Good luck with the sale
Dunno but here's mine;


I'm sure his will do the same.
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #13 ·
Is this the one on youtube doin the wheelies on concrete? I know its not related to the sale but it looks the same..


Good luck with the sale
Thanks the video on concrete in my driveway is linked in my 3rd post.


Is this the one on youtube doin the wheelies on concrete? I know its not related to the sale but it looks the same..


Good luck with the sale
Dunno but here's mine;


I'm sure his will do the same.

Nice wheelie Dean! We just got 5-6" of snow this thing is a blast power sliding around in the snow!
 

·
Registered
Joined
·
31 Posts
Where are you located? What about a lightly moded 686.
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #17 ·
Send me a PM of what you are thinking. I am in Swartz Creek MI 48473. The machine is up north near Remus 49430 I can have it either place.
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #18 ·
This has a 2010 800R motor in it... more hp than the older HO motors.
 

·
Registered
Joined
·
31 Posts
I have a green 686 10.1 comp ratio motor. Stock cam jetted carb muzzy pipe deleted factory intake. Has a trinity sheave w/stock clutching. It will go 55-57 w/27" mud lite xtr. Has newer 14" ss rims. I don't know what you will be looking for $ wise.
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #20 · (Edited)
Overall I would rather just outright sell. I figured if someone had a stock rhino and wants to get into a rotax setup I would consider partial trades.

Only Rotax Setup for sale right now on the forums...
 
1 - 20 of 39 Posts
Top