Yamaha Rhino Forum banner
1 - 20 of 31 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
394 Posts
There is an oem dipstick extension off a different model rotax. If someone could post a link to the thread that has that I'd appreciate it. I can't seem to find it.

John
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #3 ·


Fiche Parts

Just pulled up a 09 Skidoo legend touring microfisch. ANybody use this option on a can am motor?
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #4 ·
Called MFS, they do not plan on making one for a rotax swap.

Anybody use the sled dipstick?
 

·
Registered
Joined
·
1,503 Posts
Mines a pain too!
 

·
Registered
Joined
·
394 Posts
Here is what I found.

The tube is from several models of the snowmobiles but I used a 2008 Ski-Doo Expedition TUV V800 Snowmobile for reference .

Part numbers are:

420631640- O-ring
420856610- Adapter
420430370- O-ring (need 2)
420856920- OIL LEVEL TUBE
420240385- Screw
420956936- OIL LEVEL GAUGE
420631642- O-ring (need 2)

Link to diagram:

http://www.rpmms.com/fiche_section_detail.asp?section=1411699&category=Snowmobiles&make=Ski-Doo&year=2008&fveh=39261
Here are a few shots of the tube installed. Sorry for my absents but I have been spending a lot of time over seas. I would love to have mine done for KOH 2012 but with the upcoming work schedule I really don't think I am going to get it done and tested.

Parts not required that are in the above parts list:
420240385- Screw: Uses an existing motor bolt
420631642- O-ring (need 2): Comes with o-rings installed on dipstick already
Ok here it is. It was posted with pics by hunt on the thread here: http://www.rhinoforums.net/rotax-your-rhino/39685-rotax-your-rhino-info-you-should-know-4.html

John
 

·
Administrator
Joined
·
2,253 Posts
Has anyone priced the Commander extension and stick? ...think it will work great also ....hell, maybe the same as the sled setup?

sent by TapaTalk ...please excuse brevity
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #9 ·

·
Registered
Joined
·
525 Posts
Here is what I found.

The tube is from several models of the snowmobiles but I used a 2008 Ski-Doo Expedition TUV V800 Snowmobile for reference .

Part numbers are:

420631640- O-ring
420856610- Adapter
420430370- O-ring (need 2)
420856920- OIL LEVEL TUBE
420240385- Screw
420956936- OIL LEVEL GAUGE

420631642- O-ring (need 2)

This setup is roughly $125 from my source.

Link to diagram:

http://www.rpmms.com/fiche_section_detail.asp?section=1411699&category=Snowmobiles&make=Ski-Doo&year=2008&fveh=39261
Here are a few shots of the tube installed. Sorry for my absents but I have been spending a lot of time over seas. I would love to have mine done for KOH 2012 but with the upcoming work schedule I really don't think I am going to get it done and tested.

Parts not required that are in the above parts list:
420240385- Screw: Uses an existing motor bolt
420631642- O-ring (need 2): Comes with o-rings installed on dipstick already
Ok here it is. It was posted with pics by hunt on the thread here: http://www.rhinoforums.net/rotax-your-rhino/39685-rotax-your-rhino-info-you-should-know-4.html

John
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #17 ·

·
Registered
Joined
·
227 Posts
Discussion Starter · #19 ·
6" puts it just under the engine cover outer/lower lip. I think I am gonna give it a try. Anybody have pics of this done?
 

·
Registered
Joined
·
227 Posts
Discussion Starter · #20 ·
Well here are some pics of the commander dipstick extension. Will have some more once it is installed.



 
1 - 20 of 31 Posts
Top