Yamaha Rhino Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
2,407 Posts
If a vendor here on this board can beat this price, I'd be interested too...
 

·
Registered
Joined
·
810 Posts
I just purchased a Dynatek CDI box from him($160), found him on/thru ebay also. I met with him personally rather than pay the shipping. He a great guy to deal with. I accually had to delay paying for my CDI because I went to Mexico for a week and never got to meet him the day before I left, he was fine with the delay in paying him. He's local (QueenCreek) and I'm in Gilbert so it was great to spend my money locally. He has a website with other great prices also. Rich
 

·
Life serves the risk taker
Joined
·
4,197 Posts
Dynatek CDI is $180-185
Sheeve mod through rhinocrap is $85
Billet exhaust tip is $45
Uni hardstyle from rhinocrap is $90. Don't know the price for K&N.

These total $405.

I don't know anything about Dynajet.
 

·
Registered
Joined
·
2,407 Posts
bought it!

Well, I pick up the kit this afternoon. Would anyone be interested in knowing what it does for my Rhino? If so I'll post my impressions as I install each part. First up will be just the sheeve as I have it of to exchange. It took about 20 minutes to get it out, going back in should be just as quick.

Here is a link to the ABS site

http://www.abswholesale.com/

C.
 

·
Registered
Joined
·
1,960 Posts
That's about what it would be if you bought everything seperately. I don't like that it doesn't say what sheave it is. I would probably rather go with one from Rhino Crap or KMS.
 

·
Life serves the risk taker
Joined
·
4,197 Posts
If you do the sheeve first you may be surprised that it does nothing. I believe the stock CDI is a speed limiter and senses the dirveline RPM's. Might be an interesting experiment to see with just a sheeve mod.
 

·
Registered
Joined
·
2,407 Posts
Results..

Chandler... you are right. The Sheeve only got me just 4 MPH, but read on

I called Dave at ABS Wholesale (see the link above) he gave me a brief rundown on the Stage 3 package and told me how to remove the stock sheeve. 20 minutes later it was off. He graciously met me half way between Florence and Queen Creek. He had all the parts with him and was on time. I gave him the cash and my sheeve. Within an hour (including a 30 minute drive) the new KMS sheeve was on. I must say I was surprised to only gain 4 MPH. I expected more, it did seem to have better acceleration at the low end. BUT I then put in the Dynatek CDI, WOW! I noticed instant gains in throttle responce and smothness, just backing out of the gaurage. I took it down the road and easily hit 55. It had more, but it was dark and I got scared as my daughter was with me. The shity stock head lights are not worthy of that speed. I have yet to re-jet or add the air cleaner and exaust tip. Regardless of performance gains that might yet bring I'm happy!

My Rhino would do 42 stock, but prefered 41. This was an easy, honest 15MPH improvement. But it's not just the speed, it's the smoothness an quicker reving that I like.

I would recoment ABS to anyone for thier service and the simple package deal.

C.
 

·
Registered
Joined
·
2,407 Posts
update..

just added the exhaust tip and K&N filter..... up to 58 mph now. Still have the jetting to do.
 

·
Registered
Joined
·
1,960 Posts
just added the exhaust tip and K&N filter..... up to 58 mph now. Still have the jetting to do.
You sound like your running good. You might not have to rejet yet. I have pretty much the same mods and mine has not needed rejetting. Especially, if your riding pretty much in the desert or dunes this time of year.
 

·
Registered
Joined
·
997 Posts
damn! I have about $6000 in performance upgrades, and I'm at 56 MPH on my difi with all same mods and more (incl big bore), but I smoke fools off the line The holeshot is my specialty! More bottom end torque!
 

·
Registered
Joined
·
2,407 Posts
You sound like your running good. You might not have to rejet yet. I have pretty much the same mods and mine has not needed rejetting. Especially, if your riding pretty much in the desert or dunes this time of year.
Thanks Fergie... I kinda thought that too. My Rhino will be kept at my place in Springerville Az all summer. At about 8000 feet with 10000+ altitudes in the area. I think I'll save the jetting until then. Overall, very pleased with these results.
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top