Yamaha Rhino Forum banner
1 - 20 of 24 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter · #9 ·
spindles are sold!!! Still have the front rotor kit as well as a nice fresh set of front hubs that I will make a good deal for both as the rotors are already mounted to the hubs with fresh bolts.
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #12 ·
They will work with a minimum of a 12" wheel and can be used on the 14" or 15" wheel. They just will not work with a 10" wheel like the stock brakes will.
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #18 ·
Will post pic's of actual brake kit this afternoon. Heading up to the builder today. Also will have some ITP SS212 15x7 4/110 pattern wheels available since I changed bolt patterns as well.

Josh
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #20 · (Edited)
Here are the pictures of the brembo brakes and they extra hubs I have. Will let the whole package go for $450 shipped. That is almost like getting a extra set of hubs for free. For reference stock rotors are 7 7/8" Diameter while the Brembo kit is 8 5/8" Diameter. Doesn't seem like much but there is more surface area to dissipate heat/stopping power as well as better calipers which eliminae brake fade.
 
1 - 20 of 24 Posts
Top