Yamaha Rhino Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
799 Posts
Discussion Starter #1


We are excited to announce the start of the June Yamaha Rhino Ride of the Month contest! This month we are looking for the best picture of YOUR Rhino, whether it's stock, modded out, in action or just hanging out!

So take your Rhino out and show off your photography skills by getting that great shot! We welcome everyone to participate this month, except previous winners from this year and vendors.

  • The photo must be uploaded to the RhinoForums.net Photo Gallery.
  • A link to the photo must be submitted to this thread.
  • Only one picture will be allowed, so make it your best!
  • You must be the owner of the Rhino.
  • Please include a description of your Rhino with a list of all modifications and enhancements.
Voting will begin around the last week of the month and run for 7 days. Once the voting ends we will publish the winning photo on the front page, the winner will receive a $50 Gift Certificate to any Supporting Vendor of RhinoForums.net and receive a Premium Membership!

Let the submissions begin :banana:
 

·
Registered
Joined
·
3 Posts
Wouldn't be a competition if only one is in it..

I'm in for the fun, this is my Rhino:




2009 Yamaha Rhino 700 FI Auto. 4x4 Sport Edition
Front Winch WARN® RT40, 4000 lbs. (1814 kgs)
Back Winch WARN® XT30, 3000 lbs (1360 kgs)
WARN® Chassis Body Armor, Front A-Arm Body Armor; Rear A-Arm Body Armor; Side Chassis Body Armor;
Rhino leather bonnet cover
LED Taillights with reverse
ITP Terracross tyres
2 Spare tyre bases (front and back spares)
Back Bumper
MSD F1Charge
Level III Cams
Two Brothers Dual Exhaust (Not recommended, Very loud)
K&N Race Filter with intake
Interior cabin LED Lights 
 

·
Registered
Joined
·
431 Posts


Picture looking out at Sand Hollow State Park, Hurricane, UT

-2006 Rhino 660.
-High comp Wiseco, Stage II cam and springs.
-Weller Racing Billet intake manifold w/ 3" SS piping and open element.
-Fuel pump, Primer, Pick-up and lines.
-Fan over ride
-FMF exhaust.
-Dynatek rev box.
-UTV inc baller Hauler. 14g greaseless and purple/white spring
-So Cal Fab Long Travel w/ 300M axles and HD tie rods, gusseted/ braced and Fox coilovers.
-Lowered Mastercraft seats, SDR bases Beard 5 points.
-Sparco wheel w/ AST quick disconnect.
-Douglas RS 112s w/ Beadlock Specialties locks wrapped in Maxis big horn IIs.
-40" Rigid E series LED and HIDs.
-Odyssee PC925 Battery.
-4 Seat cage with cooler racks and aluminum roof.
-Empyre Racing Wide body.
 

·
Registered
Joined
·
1,018 Posts
OK I'm in......:)


2008 Yamaha rhino 700 sport edt
2 seater home built cage with rear bumper and spare tire carrier...
full windshield...full aluminum roof...home built doors..
mirrors.. billet gas cap..
morton black spray on bed liner inside and underneath
to quiet down the rattles...
home made front splash gaurds ..dust shield kit....
white wide body kit...
fabtech +6 long travel kit with hd spindles...
dirt logic shocks..... springs front 275 lbs.. rear 350
front billet king frame bracebillet king intermediate brace..
weld in frame gusset kit.. frame brace with diff support and cage mount...
lic plate mount with light... bmw hd steering rack and tie rods.....
unisteer power steering kit
autometer gauges oil press oil temp water temp
auto meter wide band air fuel with lighted warnings ...
afe air box .................
raptor stage 2 cam
47mm throttle body
10.5 to 1 cp piston
muzzy exhaust w polished cans
port & polished head w +1 ferra valves int & exh
msd power sport fi ignition controller
bazzaz fuel controller with auto tune
joes oil filter relocate kit
stainless steel 8an hose and fitting for oil cooler
relocated hd oil cooler with separate fan & switch
tcp triple bypass radiator and shourd w fan and switch
jbs (hot rod) sheave with greaseless od weight 15.2gm
big horn tires mounted on itp 7 beadlock rims
overhead stereo and speakers... led dome light..
Simpson silver 5 point seat belts..
new hid lights with relay kit... 7" checker hids with relay kit...
billet whip mount..with safeglow 6' whip...
dust proof rocker switches...
and much more i have forgotton.....
not done yet...:)
 
1 - 5 of 5 Posts
Top