Yamaha Rhino Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
I am new to the rhino...
I have a rhino with a J strong Industrie hood with stereo but it has two AUX switches that i could utilize but i not know where to tap into them?
Do i go from battery i checked its fuse only see one?
I can't wire into hood sealed....so does anyone know where?
 

·
Registered
Joined
·
6 Posts
Make sure you put a fuse inline with the switch before connecting to battery. I put an electrical wiring junction box that allows battery connection without a mess of wires. Am putting a second battery in for lights, radio, etc..., that is separated from the primary battery. This leaves the primary battery for running the engine. Second battery charges from the same alternator but accessories do not drain primary battery. Got a Polaris kit to add the battery that is suppose to compatable for any side by side. Had to go through the fireware up under the dash to run wires. Find a place that there is nothing on the other side. You can get rubber groumets to seal the hole that the wires can run through at any auto parts place. They are regular automotive firewall plugs.
 
1 - 2 of 2 Posts
Top