Yamaha Rhino Forum banner
1 - 1 of 1 Posts

· Registered
144 Posts
i have a 700fi,, no fire to the plug,and the coil checked good,, engine turns over good but no fire... can you help,, thanks "Diveman"
When you checked coil, I'm guessing you mean resistance. Check for pwr on the 1 wire when key on or cranking. The other wire goes to cdi box, controls coil. If you have pwr there, then you need to look at timing sensor, wiring to cdi, or cdi itself. Timing sensor is mounted in with stator. Hope this helps.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.