Yamaha Rhino Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
77 Posts
Discussion Starter · #1 · (Edited)
I installed the HID light kit with high/low beams from "Offroadobsessions" a while back. I love the light they put out but one of the lights don't want to come on when the temps get around freezing. I found this out at my hunting lease last week. Anyone experience this with you HID lights?
When I was doing research on HID lights on this forum someone suggested using dielectric grease on all the connections. I did not do this, should I have?
 

· Registered
Joined
·
77 Posts
Discussion Starter · #2 ·
No one else has had this problem or am I the only fool that uses my Rhino in freezing weather?
 

· Registered
Joined
·
66 Posts
I have the Rigid HIDs and have the same problem.... But I believe it is a faulty ballast... They are sending me a new one. It started while on my hunting trip also.... So we'll see when I get the new ballast.
 

· Registered
Joined
·
77 Posts
Discussion Starter · #6 ·
HID problem fix?

I have the Rigid HIDs and have the same problem.... But I believe it is a faulty ballast... They are sending me a new one. It started while on my hunting trip also.... So we'll see when I get the new ballast.
Please let me know if replacing the ballast fixes the problem. I am going hunting again this weekend and we will see if the problem persists if it gets cold enough.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top