[fatjimi]

I know LSR makes a rear frame gusset/stiffener, does anyone make a front frame gusset/stiffener?

 

[SOUTHBAYRHINO]

What part of the frame??? We make a frame gusset kit 12pc.

 

[fatjimi]

Sorry, let me clarify. LSR makes a bolt om rear frame gusset/stiffener. I am looking for a bolt on gusset/stiffener for the front.

 

[SOUTHBAYRHINO]

Oh sorry, I just make the weld in gusset kits so your a-arms don't rip out of the sockets, and I make spindle gussets to prevent bending spindles, and I am working on a dimple dyed channel boxing kit for bracing the a-arm channeling front and rear. Thanks

 

[fatjimi]

If you decide to make the bolt on frame gusset/stiffener for the front, or if you come across someone that does, let me know.

Does your cooler full of Bud Light fly out when you hit jumps?

 

[Mr. Off-Road]

is this what you are looking for?

Fabtech makes them.

 

[SOUTHBAYRHINO]

Close to what I have except mine has some hole patterns lasered into it, and I offer it with an optional spindle steer knuckle gusset (stiffener) as well for about same price or less with more parts!

 

[Brian B]

I think what you're talking about is LSR's rear diff bracket?

 

[fatjimi]

LSR calls it a rear gusset plate, it bolts to the a-arm mounts and the rear diff. I'm looking for something similar to go on the front.

 

[Chandler]

It does both. It gussets one side of one arm mount and then has a bolt to the rear differential.

 

[LoneStar Racing]

we make one for the front too. We should have them available in the next week or so. It does the exact same thing as the rear one. It will still pick up a mount on the lower part of the front diff as well. Pricing will be the same. Comes with longer a-arm bolts too. It will be kind of a pain to install depending on the bumper you run. There is room for pretty much any bumper that mounts to the stock points, but i am sure there will be some issues with some that are different from the "norm". But there is plenty of room for the stock bumper, and our bumpers, so it will all depend on how the front bumper is made. We can't make something that fits every possibility out there.. i wish we could.

Greg

 

[fatjimi]

Sounds good, will you be listing it on your web site soon?