Yamaha Rhino Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
just bought a 2011 700 FI, and can't get more than 40 mph out of it. At that speed, the engine feels like it has a governer on it, or the valves start floating. Any help would be great!
 

·
Banned
Joined
·
401 Posts
Need a msd or a jbs sheave
 

·
Registered
Joined
·
615 Posts
It does have a maximum speed governor built into it, around 40 mph............the cdi controls it...........
 

·
Registered
Joined
·
615 Posts
get a Dynatek cdi they are all governed at 40 mph from factory
That is what I have and reprogramed it to my standards, top speed is now 106kmph which is about 63mph............
 

·
Registered
Joined
·
2,200 Posts
MSD is good for the 700 and Dynatek for the 660. but also get JBS setup, you will see a huge difference with that and the MSD
 

·
Registered
Joined
·
561 Posts
Buy the jbs hot rod sheave first, you should see around 50 mph before the governor kicks in. Then buy the msd. I have both, the sheave gave me a lot more gains, low mid and high end. The msd just took the governor away.
 
1 - 9 of 9 Posts
Top