Yamaha Rhino Forum banner
1 - 2 of 12 Posts

· Registered
Joined
·
503 Posts
Hello new to this site and wondering if anyone has heard of the problems with the electric fuel pump from BRP? it will stall out at all different levels of throttle and until the engine is back at idle and then it fine? Please help want to get it running!! Thanks
Where do you have your pump wired into? If it is tied in with the ignition somehow remove it from that sorce and tie it direct to the battery and try running it again see if it works then you need to find a better place to get power.

I had a similar problem.
 

· Registered
Joined
·
503 Posts
is there any circuits on your fuse strip that come on when the key is turned on? What makes the fuel pump come on?

Is this pump something you just added?

I have the BRP fuse block on my Rhino and where they tell you to hook the ignition ON only wire. Pulled that wire off and it fixed my problem some how it was messing up my ignition.
 
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top