Yamaha Rhino Forum banner

Dynotec Power Commander mtg

2K views 2 replies 2 participants last post by  sandbuster 
#1 · (Edited)
DynoJet Power Commander mtg

The instructions for mounting the Power Commander say to use the enclosed piece of Velcro to mount the module. My experience with Velcro is when the adhesive gets hot it tends to separate from the applied surface. I don't want a $400 module bouncing around the engine compartment so I came up with a little different idea. May not be by the book but it ain't going anywhere.
 

Attachments

See less See more
3
#2 ·
I'm with you on the Velcro, the alternate plan looks good.
 
#3 ·
The instructions for mounting the Power Commander say to use the enclosed piece of Velcro to mount the module. My experience with Velcro is when the adhesive gets hot it tends to separate from the applied surface. I don't want a $400 module bouncing around the engine compartment so I came up with a little different idea. May not be by the book but it ain't going anywhere.

What's the trick to post real pictures instead of thumbnails? Does one need the Premium subscription for that?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top