Yamaha Rhino Forum banner

CV install

1387 Views 10 Replies 5 Participants Last post by  honda450sfm
Need help putting my rear inner cv's back together. Does the cage go back in the cv with the flush side out or flush side in. There is a noticible difference on the cage from one side to the next. One is flush the other is offset. I took pics but can't upload from my phone. My dumb ass forgot to look when I pulled them out. Thanks for the help.
1 - 5 of 11 Posts
Thanks, I don't want to ruin anything else!!
What about CV boot grease. Can't I just go to Napa and get CV grease from them? If so how much grease per boot. I know when I did a boot kit once the grease was in a pre measured container and I don't remember how much it was.
I'm a big guy with some pretty big hands, Can you put too much?
That's good, any type you prefer?
1 - 5 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top