Yamaha Rhino Forum banner

CV Axle Problem

765 views 1 reply 2 participants last post by  Brian Lee Rhino450 
#1 ·
Hi all. First of I'm new here, second I have a new to me 06 rhino 660 I justy recently got running. The problem I'm running into now is that the back left CV axle doesn't want to stay in the rear housing. Wondering if it just might be the retainer clip or if it would just be wise to replace the whole axle. Thanks in advance.
 
#2 ·
Could b the clip, check make sure the brackets that hold the diff arent cracked. 660’s were bad about cracked brackets. Only other thing i heard of that causes this is if the rear knuckle was installed upside down


Sent from my iPhone using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top