Yamaha Rhino Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
I jumped my Rhino and came down hard on the left front and the left wheel looks like it sticks out futher on that side and steers funny....Any idea what it could be? Everything looks consistent on side to side...The front dif is leaking a little oil too.

Thanks in advance.
 

·
Premium Member
Joined
·
7,795 Posts
x

stand ten feet away and look at the height of the top ball joints compared to the height of the tie rod ends,one is probably higher than the other telling you that you tweeked the steering arm up which throws the alignment out on the wheels and the steering wheel,if they are matched you probably did something worse like pushed in the lower a arm mounts into the bottom rail....hope its the previous fix...
 

·
Registered
Joined
·
190 Posts
I would vote for a bent steering knuckle. It would be bent up where the tie rod connects.
The best way to check is using the top cap on upper ball joint looking aft, it should be in a horizontal plane. This is normal when you hit wrong or land hard.
 
1 - 3 of 3 Posts
Top