Yamaha Rhino Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
521 Posts
It's kind of a common problem. Just hit it with an air blower to clean it out and spray around the perimeter with WD40. It'll come loose.
 

·
Registered
Joined
·
82 Posts
I was going to chime in as Ive had that problem as well, but I see its been resolved. The dealer said it was full of crud, mud and what not, so they cleaned it out and it works fine now. It was so stuck that I attempted (one time) using a pair of pliers and it didnt budge. Ive added cleaning that to the list of preventative maintenance in the future.
 

·
Premium Member
Joined
·
7,795 Posts
x

just open it up and pull out the little ball bearings and spring, it'll work everytime,done it to all my rhinos after they start sticking..
 

·
Registered
Joined
·
41 Posts
I just picked up another 2013 Rhino last week, new from a dealership in El Paso TX (was an 18 hour drive one way!). The machine as 3 miles on it and I cannot slide the lever over to engage the front locker. I'll try the WD40 thing, but I know mine isn't the result of being dirty because the machine is brand new.
 
1 - 7 of 7 Posts
Top