Yamaha Rhino Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I've searched and I've searched, but I cannot find exactly where the reverse sensor or reverse sensor wire is so I can ground it. I have a 2009 700 and there seems to be some difference as to where the sensor is and where the wire runs for the 700's and the 660's. Can someone please help? A picture of the 700 would be GREAT. Thanks guys!!
 

·
Registered
Joined
·
271 Posts
It's a single wire, and you ground it to the frame (or something metal in contact with the frame, you get the idea..)

But.. What exactly are you trying to do? Just override the reverse rev limit? If so, keep in mind that your reverse light on your digital dash will no longer light up when in reverse..

If you're trying to solve a different issue, let's talk about it ;)
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
It's the problem that when I'm riding in high the reverse light comes on the dash the rev limiter kicks in at 23 mph and the rhino starts cutting out and sputtering. When the reverse light is not on, it runs just fine. I've done all kinds of research and it sounds like this is a common problem. So, instead of replacing the sensor, and still possibly have the same problem. I"m just gonna ground it and be done with it. Thanks for all of the info!!!!
 
1 - 5 of 5 Posts
Top