Yamaha Rhino Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,131 Posts
If the pads are not shot...the threaded rod sticking out the back of the caliper is for adjustment. Loosen the jam-nut and screw the rod in till it stops, and then turn it back out 1/2 to 3/4 a turn. James (JBS) has a good video showing how to modify your caliper to get the most miles between adjustments.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top