Yamaha Rhino Forum banner

wv hot rod rhino sheave

  1. 2011 Yamaha 700 SE

    General Rhino Discussion
    I have a chance to buy a brand new 2011 yamaha 700 se for $10k. This was a contest prize somebody won. Did yamaha make a "special edition" and a "sport edition" in 2011? This seller is calling it a special edition, but i think its a sport edition. Does anybody know?
  2. Ok, first question.

    General Rhino Discussion
    Since this is the first UTV I have ever had much less ridden, can you tell me some of the things I should be aware of such as sounds, vibrations, or actions that would indicate my machine is broke or at least on it's way. Also what are some of the preop checks ya'll make before taking your...
  3. What Do You Think Of This Wear?

    This is off an '08 700, stock, except for this HW OD slider kit. After 750 miles of desert trail running on the sliders, I decided to see how they were doing. I could still hit 50+ on GPS and had no performance problems. Actually, I was looking for an excuse to get the HOT Rod sheave. ;)...
  4. another satisfied JBS sheave customer!

    General Rhino Discussion
    Edwin (BIGKAT660) made the trek from LA to my house, about 2.5 hours so i could install his new JBS sheave, Orange spring, and new belt. so i tore down his CVT and got all the peices of the belt out and pulled the fixed sheave (behind the primary) out so i could sand the grooves out...
  5. Must haves

    General Rhino Discussion
    What is the coolest upgrade you've done to your Rhino.I would have to say Putting on BH tires really made a nice ride.
  6. speedo correction for larger tires

    Audio, Lighting and Electrical
    anything available to correct the speedo and mileage readings when you install larger tires.
  7. Will a Rhino Machined sheave work on a Grizzly?

    Does anyone know if a Rhino machined sheave will work on a grizzly? I have a Grizzly owner interested in my sheave but I'm not sure if it will work or even make a difference for him. I know hunter works is using the Grizzly sheave and milling it for his new sheave design.
  8. New OEM Belt, loud squeak

    General Rhino Discussion
    I own a 2005 660, it has 26x10x12 mudlites and everything else is pretty much stock, i broke a belt and replaced it with a new OEM, when i replaced it i cleaned the sheave and noticed the weights were misplaced, i put it back together and now when i take off it squeaks and i can hear it slipping...
  9. looking for 14 gram od wghts.

    anyone know where i can get 14 gram od greaseless weights.
  10. exhaust

    Looking to put a exhaust on my 686, stage one cam, hot rods sheeve rhino, rutting rhino cdi, what options should i look at and prices to expect.
  11. Loss of MPH please help!

    I purchased a used 2007 Rhino 660 a few months ago. It has upgraded exhaust, tires, CDI box, stereo ect.. I have consistently seen a loss of mph since my purchase. It used to top out at 49-47 mph now the most I can get out of it is 42 mph. It sounds like the engine is revving out to me because...
  12. Belt questions.......

    General Rhino Discussion
    Ok, so now that the diff issue is fixed on the Rhino and I have been able to actually give it some go pedal, I've noticed that my top speed "might" be 35mph tops....... I have a MooseRacing CDI, Dynatech jet kit, aftermarket clutch kit (no clue on specs),twin-air air filter, (some kind of...
  13. need some input....why'd she throw a rod?

    Hello, Just bought a 2008 rhino 700 sports edition with 4500 km on it. I bought it with a blown up engine and figured it'd be a fun project rebuilding it. Well anyways I've got it all torn down and in the process of ordering parts and rebuilding. What looks like happened is the lower...
  14. Top speed 37 mph, worn clutch belt?

    I just sold my grizzly and bought an 07 rhino this weekend. So far so good, however the top speed is only 37 MPH. It gets there nice and smooth, then governs out at 37, with the factory wheels and tires and also with 27" mudlights. I had read a few forums that mention it might be the belt, so...
  15. need help 2006 rhino 660 top speed 47mph on 26inch outlaws

    General Rhino Discussion
    i need some help i have a 2006 rhino 660 with a performance sheave k&n filter new belt jet kit msd speed enhancer 26inch outlaw stock exhaust top speed is only 47mph does that sound right
  16. JBS Hot Rod Sheave at RuttingRhino.com - Wake up that Rhino

    General Rhino Discussion
    I just installed my JBS Hot Rod Sheave kit w/OD slider weights and cam plate from RuttingRhino.com. I spent many hours reading and researching this and liked what I heard about this sheave. I was not disappointed, it woke up my 2006 660 like never imagined. I read the hipe but you must try it to...
  17. rhino sluggish????

    General Rhino Discussion
    i bought my rhino 2 days ago it has 1200 miles its a 2007 660 anyways when i test drove it it felt like the ebrake or something was sticking on it seems like a lot of gas is needed to get it to start moving and it seems really jerky even worse on corners almost as if 4 wheel drive is on but...
  18. rutting rhino and wv hot rod rhino

    General Rhino Discussion
    I ordered a jbs hot rod rhino sheave Sunday, I received it today and installed it today. It is awesome, ran it up and down the road a couple times and there is a night and day difference in my rhino. Craig at rutting rhino was absolutely great to order from and deal with, and James was awesome...
  19. Primary clutch 660

    Want To Buy
    Hello all , I am chasing a primary clutch , I have broken a piece out of mine where the sheaves go and also some sheaves as well, if any one has them,i would be gratefull, you can contact me by email at [email protected], I will pay for the shipping thank you for your time Wayne :banana:
  20. Newbie help with purchase

    General Rhino Discussion
    I am thinking about buying 06 Rhino with 300 some hours, 25 on an overbore kit for 7000 bucks. What do you think? Thanks Has following extras: -Panasonic CD Player with Sony Speakers -Cab Heater -Trail Armor Front and Rear Bumpers -Diamond Plate Floorboards and Top -Temp Guage -Custom...