new intake for 08 Rhino's - Yamaha Rhino Forum - Rhino Forums.net
Rigid Industries Rigid Industries - Mesa, AZ - 480-655-0100

 
LinkBack Thread Tools Display Modes
post #1 of 23 (permalink) Old 07-24-2008, 11:28 AM Thread Starter
Beer-thirty
 
RIGID Industries's Avatar
 
Join Date: Jan 2007
Location: Mesa
Posts: 1,488
new intake for 08 Rhino's

Here is our new intake for the 08 Rhino 700. Comes with either a K&N or UNI filter. We believe the K&N flows better, the UNI doesnt have quite the flow but does filter better. Billet adapter with o-ring seal, and all hardware are included. Installs in about 10 mins and runs in your stock air box without the lid allowing for more air flow. For better performance gains we recommend using this with an ECU, and exhaust.
K&N filter/adapter kit $149(outerwear available for $18)
UNI filter/adapter kit $119
RIGID Industries



RIGID Industries is offline  
Sponsored Links
Advertisement
 
post #2 of 23 (permalink) Old 07-24-2008, 11:32 AM
 
Join Date: Mar 2008
Posts: 1,123
Looks like a quality setup... any pictures of it installed? Any dyno runs to see the gain if you just add this to a stock motor (no other mods)?
TroyKrum is offline  
post #3 of 23 (permalink) Old 07-24-2008, 12:03 PM Thread Starter
Beer-thirty
 
RIGID Industries's Avatar
 
Join Date: Jan 2007
Location: Mesa
Posts: 1,488
Install pic

Troy,
Here is an install pic, with the prefilter. As far as a dyno sheet, it's not needed. We did Dyno with it by itself and did not see any significant gains, it needed the ECU, and exhaust and a tune to find any measurable power. Some other companies are saying they are finding a 1-1/2hp, we found about 1hp gain in ours, again-i dont think that is measurable as far as feel goes, the car just flows better and the intake is a piece of the puzzle.
thanks for your interest, i hope this helps
Taylor
RIGID Industries
RIGID Industries is offline  
Sponsored Links
Advertisement
 
post #4 of 23 (permalink) Old 07-24-2008, 12:06 PM
Official Site Vendor
 
THE ONE's Avatar
 
Join Date: Jan 2007
Posts: 2,488
looks sweet taylor...

Tony Schumacher, Maricopa Real Estate
THE ONE is offline  
post #5 of 23 (permalink) Old 07-24-2008, 12:33 PM
 
Join Date: Mar 2008
Posts: 1,123
That looks real nice... good price too! I might need one of these!
TroyKrum is offline  
post #6 of 23 (permalink) Old 07-24-2008, 12:34 PM
 
Join Date: Jan 2008
Posts: 0
Quote:
Originally Posted by TroyKrum View Post
That looks real nice... good price too! I might need one of these!
then you can add it too your list of stuff for the Rhino Of The Month
KJSmith84 is offline  
post #7 of 23 (permalink) Old 07-24-2008, 12:48 PM Thread Starter
Beer-thirty
 
RIGID Industries's Avatar
 
Join Date: Jan 2007
Location: Mesa
Posts: 1,488
i think you do too

I think everyone needs one........

Thanks Tony, sorry i didnt have time to talk the other day at Wellers, i was in a hurry. Paint looked good though.......from what i saw

Taylor
RIGID Industries is offline  
post #8 of 23 (permalink) Old 07-25-2008, 04:44 PM
Boss
 
DoubleTroubleHooks's Avatar
 
Join Date: May 2007
Location: Mesa, Az
Posts: 3,271
will be sending Jeff over for an install
DoubleTroubleHooks is offline  
post #9 of 23 (permalink) Old 07-25-2008, 05:41 PM
 
Join Date: Jan 2008
Posts: 147
Does this kit or do you sell a kit so I can still use the lid?
What is a good exhaust and fuel remapper?
I was looking at the alba full system. It needs to be very comparable to stock as far as sound goes. I want the most amount of power with the least amount of noise. How is the dobeck fuel remapper? What kind of gains would I be seeing with an alba full system, k&n intake, and dobeck fuel remapper?

Thanks

Laters
Bubbas is offline  
post #10 of 23 (permalink) Old 07-28-2008, 09:23 AM Thread Starter
Beer-thirty
 
RIGID Industries's Avatar
 
Join Date: Jan 2007
Location: Mesa
Posts: 1,488
Bubbas

Bubbas,
Yes you can use the lid with our intake, I should of mentioned that for all of you Mudders out there...As far as an exhaust system that is not louder than stock good luck, at least for one that works. I have not heard an Alba on a 700, i do know that on the 660 it was quite a bit louder than stock. I was really impressed at the sound of the DMC Duals that we installed, very close to stock. We tried a single pipe, just couldnt find nearly as much power as we did on the duals.
I am not sure of the gains with an Alba, we tested the Gibson Stainless single and the DMC Duals. the single got us about 8 hp with the intake and programmer with a dyno tune, the dual about 11hp.

Debeck makes great products, but we are using the Dynatek programmer to make our fuel adjustments.
any more questions let us know.

Taylor
RIGID
RIGID Industries is offline  
post #11 of 23 (permalink) Old 07-28-2008, 09:25 AM
 
Join Date: Jan 2008
Posts: 0
is this a different filter then the one they installed on the 2guys garage? this K&N looks a little taller then the one they had.
KJSmith84 is offline  
post #12 of 23 (permalink) Old 07-28-2008, 09:42 AM
Mountaineer
 
Aquaholic502's Avatar
 
Join Date: Jun 2007
Location: Paso Robles, Ca.
Posts: 330
Are you guys going to be doing any testing on the new msd controler for the 700?

08 Rhino 700 EFI
Douglas Rockstars with OMF Beadlocks, Maxxis Bighorns 26x9x12, 2" spacers, Odyssey battery, SSV pods with Alpine 6x9's, Garmin Zumo 665, Dirtlights HID Conversion, Rigid Ind. UNI Intake, FU2 Radius 4 seat cage, Crow Harnesses, Quick light 6' whip and twisted stitch aggressor x seats.
Aquaholic502 is offline  
post #13 of 23 (permalink) Old 07-28-2008, 09:42 AM Thread Starter
Beer-thirty
 
RIGID Industries's Avatar
 
Join Date: Jan 2007
Location: Mesa
Posts: 1,488
Yes

the one on Speed Channel was a "stunt filter".
RIGID Industries is offline  
post #14 of 23 (permalink) Old 08-07-2008, 06:06 PM
Mountaineer
 
700RhinoRampage's Avatar
 
Join Date: Mar 2008
Location: Ohio
Posts: 315
Well with these new exhaust are they aloud in state parks?
700RhinoRampage is offline  
post #15 of 23 (permalink) Old 08-08-2008, 08:04 AM
 
Join Date: Jan 2008
Posts: 0
Quote:
Originally Posted by 700RhinoRampage View Post
Well with these new exhaust are they aloud in state parks?
Are you talking about the DMC's? They are only 96db so I would think so. They also have spark arrestors so they are legal.
KJSmith84 is offline  
 

  Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > Sponsor Forums > Rigid Industries

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Rhino Forum - Rhino Forums.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome