clutch replacement - Yamaha Rhino Forum - Rhino Forums.net
General Rhino Discussion For General Rhino Discussion

 2Likes
  • 1 Post By Brian Lee Rhino450
  • 1 Post By Hunterworks
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 10-23-2019, 08:09 PM Thread Starter
Paper Boy
 
Join Date: Oct 2019
Posts: 14
clutch replacement

Recently i purchased a 2007 Yamaha Rhino 660 i cant afford to give it to a dealer and get charged $1200 plus i would rather do this myself to know how to do it.... when i first got it i noticed brakes were grabbing got brand new pads, rotors and calipers to be safe and it seemed a little better but the rhino seems to hesitate to go and if u just baby the pedal good luck getting it moving unless you've been driving it awhile.... anyways it runs fine starts fine when i am driving it if i punch it it grabs good and i get up to about 40mph i changed oil with 10w40 motorcycle oil with no friction additives or anything also said it was fine for wet clutches.... now to the hard part i know i need to inspect the belt... odometer got reset when a new one went in from last owner and even the dealer that fixed it for him couldn't get it to work to get original milage.... i really wanna get it mechanically sound for winter i mean im sure it would keep going for awhile as i dont beat on it and have changed all fluids and basically did a full tune up.... could the belt be slipping possibly? like i said when ur moving the thing gets up and goes if u give it gas its a beast to be honest.... also if i do need to replace this i need a really good guide and a good place to buy the parts and not go over 700 dollars unless its a killer deal.... thanks guys


P.S owner was a older guy said it has about 2300 miles i have put 20 on it in 2 weeks but who really knows
Tylers503 is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 10-23-2019, 08:57 PM
Site Supporter
 
Brian Lee Rhino450's Avatar
 
Join Date: Dec 2011
Location: Tuscola Texas
Posts: 3,051
clutch replacement

First thing i would recommend to anyone buying a used rhino is remove and service the primary and secondary sheaves, most times they are packed with dirt not allowing the weights to operate properly in the sheave


Sent from my iPhone using Tapatalk
jimclemjr likes this.

09 700 4seater, Nflow remanned motor with reverse upgrade, web cam, boared throttle body, duel muzzys with spark arrestors, MSDfuel controller. JBS Extreme2 sheave, SDR full radius cage, SDR doors, SDR long travel with summer brothers axles, Fox remote resi shocks with clickers on rears.
Brian Lee Rhino450 is offline  
post #3 of 5 (permalink) Old 10-23-2019, 09:01 PM Thread Starter
Paper Boy
 
Join Date: Oct 2019
Posts: 14
ive serached for videos not a lot out there to show me how to do that exactly
Tylers503 is offline  
Sponsored Links
Advertisement
 
post #4 of 5 (permalink) Old 10-23-2019, 09:10 PM
Site Supporter
 
Brian Lee Rhino450's Avatar
 
Join Date: Dec 2011
Location: Tuscola Texas
Posts: 3,051
Text me 325 201 2700


Sent from my iPhone using Tapatalk

09 700 4seater, Nflow remanned motor with reverse upgrade, web cam, boared throttle body, duel muzzys with spark arrestors, MSDfuel controller. JBS Extreme2 sheave, SDR full radius cage, SDR doors, SDR long travel with summer brothers axles, Fox remote resi shocks with clickers on rears.
Brian Lee Rhino450 is offline  
post #5 of 5 (permalink) Old 10-24-2019, 05:36 AM
Official Site Vendor
 
Hunterworks's Avatar
 
Join Date: Jan 2009
Posts: 3,477
Take clutch cover off clutch, notice where belt is sitting in the secondary the one one the front is the belt sitting even with the top ofit or down in it, if down in it, the primary need attention like cleaning etc, if belt is where it should be, get up against something in high range, 4wd that will not move and ease into the gas, you are trying to put vehicle in a bind, give it gas, does rpm bog down like it should or maintain or go up, if the latter, look down, do you see anything moving , no then your wet clutch is slipping, if the primary only is moving then belt slipping


Todd
HighDezRhino likes this.
Hunterworks is offline  
Reply

  Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > General Rhino > General Rhino Discussion

Tags
clutch , clutch belt , rhino 660

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Rhino Forum - Rhino Forums.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome