Rhino 660 Stalling...HELP! - Yamaha Rhino Forum - Rhino Forums.net
General Rhino Discussion For General Rhino Discussion

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 11-30-2018, 07:02 AM Thread Starter
Paper Boy
 
Join Date: Nov 2018
Location: Feura Bush New York
Posts: 17
Garage
Rhino 660 Stalling...HELP!

Hey guys, I am a new member to the site and also a new Rhino owner. I've been doing a lot of reading on this topic and I KNOW it has been beat to death but I still cant find a definitive answer for my condition. so, here goes... I started with a multitude of issues, carb work, fuel pump, filter etc but I am still having the same issue. The rhino stalls out when its above ~180 degrees and or just had been under load. The thing about it is that it stalls like someone hit the kill switch, no prior sputtering, spitting, choking...just like the ignition was cut. It will start back up on choke only and very hard to start. so here is what I have done... new carb with stock jetting, adjusted AF mixture based on plug, new plug (iridium), new air cleaner, oil, oil filter, weller fuel pump kit (pump and hoses), thermal switch in radiator (because I thought it was overheating), new gas and new fuel filter. if I start this up when its cold and let it idle, it will sit and idle all day! Can anyone help?!
RhinoBear is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 11-30-2018, 10:04 AM
Spectator
 
Join Date: Nov 2018
Posts: 4
what's up man, same here new Rhino owner I'v been ridding since a young age but with the fam decide it was time for sxs. Have you tried swapping back the stock CDI?
tommartin is offline  
post #3 of 4 (permalink) Old 11-30-2018, 02:52 PM Thread Starter
Paper Boy
 
Join Date: Nov 2018
Location: Feura Bush New York
Posts: 17
Garage
To me the CDI sand coil look stock. I did ohm out the coil and cap. The manual says between .18-.24 and I have .7. Not sure if that’s ok or not, maybe causing the issue. Cap ohms out ok.
RhinoBear is offline  
Sponsored Links
Advertisement
 
post #4 of 4 (permalink) Old 11-30-2018, 03:10 PM
Spectator
 
Join Date: Nov 2018
Posts: 4
i'll check mine and see what i get. I'll let you know, I'm hoping i have time this weekend.
tommartin is offline  
Reply

  Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > General Rhino > General Rhino Discussion

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Rhino Forum - Rhino Forums.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome