While searching for tires on CL, I came across these:

YAMAHA BIG WHEEL KIT FOR RHINO!!!

Will they fit my stock 2004 660? Seems to be a pretty good deal...

What's the pros/cons of such a big tire?

__________________
2004 Rhino 660 - Green - One Industries Graphics - ViperMax 4500 winch - Custom 78" Plow -

they will probably fit, you may have to cut the plastic thing in front of the rear tire, or if they dont fit buy a cheap High lifter lift off of ebay

28" will deff rob a lot of power.

__________________
04, "Benchmark" 686 kit, P&P head with 1+ valves. Amsoil, Mikuni 45 carb, K&N filters, Gorilla rear axles, sport resi shocks, TCP shroud, 4pt Crow harness, Custom built roll cage, Warn 3000 wench, ITP bead locks, Pro Circuit Duel exhaust and Fire Engine Red!

yes it will rob lots of power, better plan on performance mods after the wheel/tires are added.

Swamp Lites are strictly a mud tire... Stay away from rocks and anything remotely sharp... The sidewalls are garbage... They wear out quick and have too many small lugs to get any real traction... I had about 75 plugs in mine when I gave up on them... I have 27x9x12 Bighorns on all 4 corners and couldn't be happier... My portable compressor and plug kit are feeling a bit lonely now however...

__________________
2008 Silver Sport 700 Rhino
27x9x12 Bighorns, Sheave, Full Body Armor, 3500 Viper Max Winch, Trail Armor Doors, HID Lights, Pod Mod Fuelie, Grant Steering Wheel, Trunk Box
Sold my Rhino 450, Mule 610 Camo 4x4, and Yamaha Prohauler 700

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

You can run the 28s, they will rob some power but if your not a speed demon you wont mind. There are better mud tires out there and i would consider these more of an all around tire not pure on mud tire. They are not that good of a mud tire to begin with.