Carb hoses and vent lines?????? - Yamaha Rhino Forum - Rhino Forums.net
Tutorials How To Guides for Modifications, Bolt-Ons, Maintenance and Troubleshooting - Pictures make it better!

 
LinkBack Thread Tools Display Modes
post #1 of 14 (permalink) Old 01-21-2008, 05:49 PM Thread Starter
Evil Kenevil
 
goobzkustomz's Avatar
 
Join Date: Sep 2007
Location: Torrance, Ca....South Bay
Posts: 419
Carb hoses and vent lines??????

where do these hoses go to from the carb. I'm putting a stock carb back on my rhino from the edelbrock i had on there. I don't have any hoses and think i need them, but don't know where they go TO.

Can someone please take a picture of their stock rhino carb and the attached hoses where they hook into.



I have #47 hooked up

I need these parts #27, 28, 29, 32, 34, 36, 48, 49
and where they hook into. I took off this stock carb a while back and don't remember ripping this much stuff out. I must of capped off some areas, but i don't remember where. Can someone take some pics and help out.

goobz@goobzkustomz.com
www.GoobzKustomz.com

2006 Rhino--custom cage, suspension gussets, twisted labs long travel w/adventure shocks, plug and play axles, alba exhaust, dynatek CDI, jetted carb, 4 acro HID's, Neri seats, simpson belts, sheave mod and duner spring, carlisle tires on ITP rims
All work self performed

Last edited by goobzkustomz; 01-21-2008 at 05:53 PM.
goobzkustomz is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 01-21-2008, 05:52 PM
Supernova
 
Snapper692's Avatar
 
Join Date: Jan 2007
Location: Mesa, AZ
Posts: 2,714
Send a message via Yahoo to Snapper692
30 & 29 are vent lines for the bowl. You can just run 2 short lines and let them hang next to the engine. 47 is for the slide and comes off the stock intake tube. 34 is the drain line for the bowl.

ΜΟΛΩΝ ΛΑΒΕ!


Snapper692 is offline  
post #3 of 14 (permalink) Old 01-21-2008, 06:00 PM Thread Starter
Evil Kenevil
 
goobzkustomz's Avatar
 
Join Date: Sep 2007
Location: Torrance, Ca....South Bay
Posts: 419
Quote:
Originally Posted by Snapper692 View Post
30 & 29 are vent lines for the bowl. You can just run 2 short lines and let them hang next to the engine. 47 is for the slide and comes off the stock intake tube. 34 is the drain line for the bowl.
what is the purpose of thes lines....are they even neccesary. Some pictures would make me feel a whole lot better.


The reason i wonder about them is becuase i fired the rhino up no prob but after it ran and the float filled up, it started to leak out the drain tube nipple. I checked the float height and it was good. Was wondering if any of these were vacuum lines and made a difference. They must be there for a reason.

Any pictures would be appreciated.

goobz@goobzkustomz.com
www.GoobzKustomz.com

2006 Rhino--custom cage, suspension gussets, twisted labs long travel w/adventure shocks, plug and play axles, alba exhaust, dynatek CDI, jetted carb, 4 acro HID's, Neri seats, simpson belts, sheave mod and duner spring, carlisle tires on ITP rims
All work self performed
goobzkustomz is offline  
Sponsored Links
Advertisement
 
post #4 of 14 (permalink) Old 01-21-2008, 06:04 PM
Supernova
 
Snapper692's Avatar
 
Join Date: Jan 2007
Location: Mesa, AZ
Posts: 2,714
Send a message via Yahoo to Snapper692
Quote:
Originally Posted by goobzkustomz View Post
what is the purpose of thes lines....are they even neccesary. Some pictures would make me feel a whole lot better.


The reason i wonder about them is becuase i fired the rhino up no prob but after it ran and the float filled up, it started to leak out the drain tube nipple. I checked the float height and it was good. Was wondering if any of these were vacuum lines and made a difference. They must be there for a reason.

Any pictures would be appreciated.
29 (27, 28 &32) & 36 don't actually hook to anything....they just kinda dangle next to the engine. I may have those lines though.....if I do, id be more than happy to send them to you!

Id snap some pics, but I ditched my stocker awhile ago....

ΜΟΛΩΝ ΛΑΒΕ!


Snapper692 is offline  
post #5 of 14 (permalink) Old 01-21-2008, 06:04 PM
Fabled
 
07fj's Avatar
 
Join Date: Oct 2007
Location: Ramona, Ca
Posts: 6,804
carb pics

Tighten the drain screw and your drain line will not leak gas. you probably emptied it that way.

I'll get pics in a minute as both mine are open right now.

Rog
Attached Thumbnails
Click image for larger version

Name:	IMG_0857.JPG
Views:	21202
Size:	302.7 KB
ID:	3641   Click image for larger version

Name:	IMG_0858.JPG
Views:	17744
Size:	284.0 KB
ID:	3642  



LOORRS Rookie of the Year
Unlimited UTV 2009

Benchmark 686, (67.6 RWHP )
HRT Motorsports cage, LSR XTR 6.5
Rugged RRP600
www.unleashedutv.com

Last edited by 07fj; 01-21-2008 at 06:16 PM. Reason: adding pics
07fj is offline  
post #6 of 14 (permalink) Old 01-21-2008, 06:10 PM Thread Starter
Evil Kenevil
 
goobzkustomz's Avatar
 
Join Date: Sep 2007
Location: Torrance, Ca....South Bay
Posts: 419
Quote:
Originally Posted by Snapper692 View Post
29 (27, 28 &32) & 36 don't actually hook to anything....they just kinda dangle next to the engine. I may have those lines though.....if I do, id be more than happy to send them to you!

Id snap some pics, but I ditched my stocker awhile ago....
if you have em, could you send em to me. I'd appreciate it.

Quote:
Originally Posted by 07fj View Post
Tighten the drain screw and your drain line will not leak gas. you probably emptied it that way.

I'll get pics in a minute as both mine are open right now.

Rog
i took it off and wiggled the float around. Put it back together and it's good to go. The screw was tight, i guess the float was sticking down. May have been careless when intalling the bowl. Pics of the vent lines would be awesome. and the drain line. Does it have a check valve in the drain line for roll over.

goobz@goobzkustomz.com
www.GoobzKustomz.com

2006 Rhino--custom cage, suspension gussets, twisted labs long travel w/adventure shocks, plug and play axles, alba exhaust, dynatek CDI, jetted carb, 4 acro HID's, Neri seats, simpson belts, sheave mod and duner spring, carlisle tires on ITP rims
All work self performed

Last edited by goobzkustomz; 01-21-2008 at 06:11 PM. Reason: Automerged Doublepost
goobzkustomz is offline  
post #7 of 14 (permalink) Old 01-21-2008, 06:12 PM
Supernova
 
Snapper692's Avatar
 
Join Date: Jan 2007
Location: Mesa, AZ
Posts: 2,714
Send a message via Yahoo to Snapper692
Quote:
Originally Posted by goobzkustomz View Post
if you have em, could you send em to me. I'd appreciate it.
PM me your address and Ill see if I can dig them out......

ΜΟΛΩΝ ΛΑΒΕ!


Snapper692 is offline  
post #8 of 14 (permalink) Old 01-21-2008, 06:17 PM
Fabled
 
07fj's Avatar
 
Join Date: Oct 2007
Location: Ramona, Ca
Posts: 6,804
I added pics of carb to show lines.

Rog



LOORRS Rookie of the Year
Unlimited UTV 2009

Benchmark 686, (67.6 RWHP )
HRT Motorsports cage, LSR XTR 6.5
Rugged RRP600
www.unleashedutv.com
07fj is offline  
post #9 of 14 (permalink) Old 01-21-2008, 06:22 PM Thread Starter
Evil Kenevil
 
goobzkustomz's Avatar
 
Join Date: Sep 2007
Location: Torrance, Ca....South Bay
Posts: 419
Quote:
Originally Posted by 07fj View Post
I added pics of carb to show lines.

Rog
so that's it.....they just hang there next to the engine huh????Not vacuum lines, just vent.

goobz@goobzkustomz.com
www.GoobzKustomz.com

2006 Rhino--custom cage, suspension gussets, twisted labs long travel w/adventure shocks, plug and play axles, alba exhaust, dynatek CDI, jetted carb, 4 acro HID's, Neri seats, simpson belts, sheave mod and duner spring, carlisle tires on ITP rims
All work self performed
goobzkustomz is offline  
post #10 of 14 (permalink) Old 01-21-2008, 06:28 PM
Fabled
 
07fj's Avatar
 
Join Date: Oct 2007
Location: Ramona, Ca
Posts: 6,804
You do need to connect the one to the intake tube, otherwise the others just hang there. The one for the fuel overflow has a oneway valve in it.

hope that helped some.
Rog



LOORRS Rookie of the Year
Unlimited UTV 2009

Benchmark 686, (67.6 RWHP )
HRT Motorsports cage, LSR XTR 6.5
Rugged RRP600
www.unleashedutv.com
07fj is offline  
post #11 of 14 (permalink) Old 01-21-2008, 06:30 PM Thread Starter
Evil Kenevil
 
goobzkustomz's Avatar
 
Join Date: Sep 2007
Location: Torrance, Ca....South Bay
Posts: 419
makes me feel a 100 percent better knowing that they don't really mean ****. I just have to get the hoses now and that one way valve. I have the intake 90 degree hose for the slide. I guess that's the only one you need for it to run. Thanks alot.
WHere else can you get this much help in 30 minutes time from posting. This website is awesome.

goobz@goobzkustomz.com
www.GoobzKustomz.com

2006 Rhino--custom cage, suspension gussets, twisted labs long travel w/adventure shocks, plug and play axles, alba exhaust, dynatek CDI, jetted carb, 4 acro HID's, Neri seats, simpson belts, sheave mod and duner spring, carlisle tires on ITP rims
All work self performed
goobzkustomz is offline  
post #12 of 14 (permalink) Old 01-21-2008, 06:37 PM
Supernova
 
Snapper692's Avatar
 
Join Date: Jan 2007
Location: Mesa, AZ
Posts: 2,714
Send a message via Yahoo to Snapper692
Quote:
Originally Posted by goobzkustomz View Post
makes me feel a 100 percent better knowing that they don't really mean ****. I just have to get the hoses now and that one way valve. I have the intake 90 degree hose for the slide. I guess that's the only one you need for it to run. Thanks alot.
WHere else can you get this much help in 30 minutes time from posting. This website is awesome.
I may have that valve too....

ΜΟΛΩΝ ΛΑΒΕ!


Snapper692 is offline  
post #13 of 14 (permalink) Old 01-21-2008, 06:47 PM Thread Starter
Evil Kenevil
 
goobzkustomz's Avatar
 
Join Date: Sep 2007
Location: Torrance, Ca....South Bay
Posts: 419
if you can send me all those hose and that valve, i'd be stoked. It's all i need to finish off this carb. And to adjust the cable. It's a fine line between not having enough slack to get a low idle, and not having full throttle. Got to dial it in.

goobz@goobzkustomz.com
www.GoobzKustomz.com

2006 Rhino--custom cage, suspension gussets, twisted labs long travel w/adventure shocks, plug and play axles, alba exhaust, dynatek CDI, jetted carb, 4 acro HID's, Neri seats, simpson belts, sheave mod and duner spring, carlisle tires on ITP rims
All work self performed
goobzkustomz is offline  
post #14 of 14 (permalink) Old 09-23-2010, 09:02 PM
Spectator
 
Join Date: Sep 2010
Location: Smith Valley, NV
Posts: 4
I had the same question about Line #27, #32 and #36, now that I know they are only Vent Lines and not a vacuum lines, my questions has been answers, Thanks
gfreyes is offline  
Reply

  Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > Technical > Tutorials

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Rhino Forum - Rhino Forums.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome