Hey guys, I bought my 06 660 about a month ago and have pulled it apart for paint.
First I Scuffed all the panels with a wet red scotch brite and scuffing paste.
Next I feathered out the smaller scratches with 320 and the bigger ones took a little putty.
I wiped them all down with wax and grease remover.
Then I used SEM's adhesion promoter.
You only have 30 minutes after you use the adhesion promoter, but then i primered all the pieces with Valspar's plastic primer.
Then i blocked it all out with 400 and then 600, I used a grey scotch brite for everything i couldn't get with the sandpaper.
Then I wiped it down again and sprayed my basecoat clearcoat.
I'm going to have to block the clearcoat with 800 and then do the flames and clearcoat.
then I'm going to block it again and stripe it and clear coat it and then cut and polish. These are the only pics I have right now.