Yamaha Rhino Forum

Best CDI?? For Rhino 660

This is a discussion on Best CDI?? For Rhino 660 within the Lighting, Stereo, and Electrical forums, part of the Technical category; Guys I was wanting to get your take on which CDI was the best for the Rhino 660. I have seen the AMR, Blackrhino, and ...


Go Back   Yamaha Rhino Forum - Rhino Forums.net > Technical > Lighting, Stereo, and Electrical

Lighting, Stereo, and Electrical For discussion of lighting, stereo, and other electrical components

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 02-21-2012, 11:18 AM
Tephloncat's Avatar
Premium Member
 
First Name: Cody
My Rhino: 2005 Rhino 660 Camo
Join Date: Feb 2012
Location: Blue Ridge, TX
Posts: 181
View Tephloncat's Photo Gallery(0) Send a message via Yahoo to Tephloncat
Best CDI?? For Rhino 660

Guys I was wanting to get your take on which CDI was the best for the Rhino 660. I have seen the AMR, Blackrhino, and Dynatek. All seem to offer the same stuff. What's your thoughts?
__________________
2005 Rhino 660 Camo, Teryx Shocks, 28" Silverbacks (FATS), Blackrhino CDI, 3" Intake Snorkel, 165 Main and 47.5 pilot Jets, Warn RT25, Full Skid Plate set, JBS primary, 14 gram OD weights, Purple Secondary Spring, and more.

Thanks JBS and Rutting Rhino...
Reply With Quote
Sponsored Links
RhinoForums.net is the premier Yamaha Rhino UTV/ATV Forum on the internet. Registered Users do not see these ads. Please Register - It's Free!
  #2 (permalink)  
Old 02-21-2012, 11:38 AM
enorman's Avatar
Member
 
First Name: Eric
My Rhino: 07 Rhino 660
Join Date: Jan 2012
Location: Maricopa AZ
Posts: 80
View enorman's Photo Gallery(0)
Thumbs up

Quote: Originally Posted by Tephloncat View Post
Guys I was wanting to get your take on which CDI was the best for the Rhino 660. I have seen the AMR, Blackrhino, and Dynatek. All seem to offer the same stuff. What's your thoughts?

Im running a Dynatek on mine. No issues yet!
Reply With Quote
  #3 (permalink)  
Old 02-21-2012, 11:58 AM
haymaker7796's Avatar
haymaker
 
First Name: Terry
My Rhino: 06
Join Date: May 2008
Location: P-burg,West Virginia
Posts: 102
View haymaker7796's Photo Gallery(0)
I have had the AMR for 4 years with no issues, plus they're the only one with a 2 year warranty, or atleast they used to. I also have their monster oil too.
Reply With Quote
  #4 (permalink)  
Old 03-08-2012, 10:06 AM
Member
 
First Name: Scott
My Rhino: 05 660
Join Date: Dec 2011
Location: Palm coast fl
Posts: 170
View scottyk's Photo Gallery(0)
I went with msd after reading about all the failures with dynateks
Reply With Quote
  #5 (permalink)  
Old 03-08-2012, 10:26 AM
UTV Inc.'s Avatar
Official Site Vendor
Premium Member
 
First Name: Nick
Join Date: Jan 2007
Location: Arizona
Posts: 9,061
View UTV Inc.'s Photo Gallery(0)
The Dynatek is the best IMO, lifetime warranty, doesnt get better than that.
__________________
Reply With Quote
  #6 (permalink)  
Old 03-08-2012, 11:14 AM
RuttingRhino's Avatar
Senior Member
 
First Name: Craig
My Rhino: Red 07
Join Date: Jan 2011
Location: Tempe, AZ
Posts: 3,239
View RuttingRhino's Photo Gallery(0)
We sell the MSD 4240...low cost... 1 year warranty... it is the only one that retains the stock cdi for all starting and running functions...the stock CDI is made by Mitsubishi and it is the highest quality CDI made for the Rhino...even if your MSD 4240 failed you could simply disconnect it and the stock cdi is still right there to run like it did from the factory...

They all have their pros and cons...well the top three anyway... Dynatek, HunterWorks, MSD 4240...and there is also a programmable Dyantek and programmable MSD...there are other brands for which I have nothing good to say so not saying anything...

I always recommend people evaluate their real needs and compare features including price with shipping instead of taking someone's word for what the best one is on the internet...everyone says theirs is best...
__________________
We are closed...2013
Reply With Quote
  #7 (permalink)  
Old 03-08-2012, 12:12 PM
bobbylee's Avatar
Member
 
First Name: Bobby
My Rhino: 06 blown up rhino
Join Date: Oct 2009
Location: Yuma, AZ/ Tucson
Posts: 42
View bobbylee's Photo Gallery(0)
I have a black rhino for sell. I went R1 thats the reason for selling it. Pm me if interested.
Reply With Quote
  #8 (permalink)  
Old 03-08-2012, 03:34 PM
Tephloncat's Avatar
Premium Member
 
First Name: Cody
My Rhino: 2005 Rhino 660 Camo
Join Date: Feb 2012
Location: Blue Ridge, TX
Posts: 181
View Tephloncat's Photo Gallery(0) Send a message via Yahoo to Tephloncat
Quote: Originally Posted by RuttingRhino View Post
We sell the MSD 4240...low cost... 1 year warranty... it is the only one that retains the stock cdi for all starting and running functions...the stock CDI is made by Mitsubishi and it is the highest quality CDI made for the Rhino...even if your MSD 4240 failed you could simply disconnect it and the stock cdi is still right there to run like it did from the factory...

They all have their pros and cons...well the top three anyway... Dynatek, HunterWorks, MSD 4240...and there is also a programmable Dyantek and programmable MSD...there are other brands for which I have nothing good to say so not saying anything...

I always recommend people evaluate their real needs and compare features including price with shipping instead of taking someone's word for what the best one is on the internet...everyone says theirs is best...
Thank you for the good info. I have a Blackrhino right now. Was looking to upgrade it if there is such a thing? Would the MSD 4240 work with the Blackrhino or would it need to be the stock CDI? Would I really get much more out of a programable unit cause I am pretty much stock (engine) except for my clutch.
__________________
2005 Rhino 660 Camo, Teryx Shocks, 28" Silverbacks (FATS), Blackrhino CDI, 3" Intake Snorkel, 165 Main and 47.5 pilot Jets, Warn RT25, Full Skid Plate set, JBS primary, 14 gram OD weights, Purple Secondary Spring, and more.

Thanks JBS and Rutting Rhino...
Reply With Quote
  #9 (permalink)  
Old 03-08-2012, 03:45 PM
RuttingRhino's Avatar
Senior Member
 
First Name: Craig
My Rhino: Red 07
Join Date: Jan 2011
Location: Tempe, AZ
Posts: 3,239
View RuttingRhino's Photo Gallery(0)
You are welcome...the MSD 4240 only works with a stock cdi...

Black Rhino has sold more than one brand with their stickers on them...the first brand was pro-comm...you know you have one if when you put it in reverse and floor it the ignition cuts out real fast...if it hauls ass and you have to let off the throttle it is a Dynatek...

If you are not having any problems with it then leave it alone...you are not going to get a power gain from switching CDIs if that is what you are thinking...

IMO...the ONLY reason to go to a programmable ignition curve is for running high compression pistons...no reason to do that on a stock piston running on pump gas...others can disagree...that is fine with me...I don't sell them and I don't care...

Having to figure out an ignition curve for an internally stock motor is a waste of time and money IMO...

If you don't like the CDI you have for any reason...don't buy the MSD 4240 unless you have the stock CDI to use with it...if you need an new CDI and don't have the stock get an Dynatek from Nick or a HunterWorks tri-fire from Todd...

For anyone just wanting the most bang for the buck who has the stock CDI...especially with an internally stock motor the MSD 4240 is a great product...we have a lot of happy customers...

Don't ask scottyk where he got his...
__________________
We are closed...2013
Reply With Quote
  #10 (permalink)  
Old 03-08-2012, 04:12 PM
Tephloncat's Avatar
Premium Member
 
First Name: Cody
My Rhino: 2005 Rhino 660 Camo
Join Date: Feb 2012
Location: Blue Ridge, TX
Posts: 181
View Tephloncat's Photo Gallery(0) Send a message via Yahoo to Tephloncat
Thank you very much RuttingRhino.
__________________
2005 Rhino 660 Camo, Teryx Shocks, 28" Silverbacks (FATS), Blackrhino CDI, 3" Intake Snorkel, 165 Main and 47.5 pilot Jets, Warn RT25, Full Skid Plate set, JBS primary, 14 gram OD weights, Purple Secondary Spring, and more.

Thanks JBS and Rutting Rhino...
Reply With Quote
  #11 (permalink)  
Old 03-08-2012, 04:20 PM
RuttingRhino's Avatar
Senior Member
 
First Name: Craig
My Rhino: Red 07
Join Date: Jan 2011
Location: Tempe, AZ
Posts: 3,239
View RuttingRhino's Photo Gallery(0)
You are welcome...

What you really need is a fuel kit and a pilot jet...maybe a jet kit depending on what you have...
__________________
We are closed...2013
Reply With Quote
  #12 (permalink)  
Old 03-08-2012, 05:04 PM
Tephloncat's Avatar
Premium Member
 
First Name: Cody
My Rhino: 2005 Rhino 660 Camo
Join Date: Feb 2012
Location: Blue Ridge, TX
Posts: 181
View Tephloncat's Photo Gallery(0) Send a message via Yahoo to Tephloncat
I have a Jet Kit but haven't installed it yet... Will it really help with power? It runs good and smooth.
__________________
2005 Rhino 660 Camo, Teryx Shocks, 28" Silverbacks (FATS), Blackrhino CDI, 3" Intake Snorkel, 165 Main and 47.5 pilot Jets, Warn RT25, Full Skid Plate set, JBS primary, 14 gram OD weights, Purple Secondary Spring, and more.

Thanks JBS and Rutting Rhino...
Reply With Quote
  #13 (permalink)  
Old 03-08-2012, 05:14 PM
RuttingRhino's Avatar
Senior Member
 
First Name: Craig
My Rhino: Red 07
Join Date: Jan 2011
Location: Tempe, AZ
Posts: 3,239
View RuttingRhino's Photo Gallery(0)
DIY Dyno-tuning Rhino 660

Based on your signature I would say no... the jet kit you got I don't know what is is but it is not ours...

You have a "snorkel" ...the devil is in the details but typically the last thing you want to do with a snorkel is have leaner needle and stock pilot jet...

You need to tune your main jets for increased air flow at the intake/exhaust...and in some cases to compensate elevation and temperature...

All a stock motor with stock intake/exhaust needs is a bigger pilot jet...if you bought a dyno-jet kit it has a leaner needle and no pilot jet...all bad...the exact opposite of what you want...

I recommend at least increasing your air flow by running 04 style and with a bigger pilot jet...use the main jets in your kit you already have...

When I said fuel kit I meant fuel delivery kit...we have several...some come with fuel pumps...
__________________
We are closed...2013
Reply With Quote
  #14 (permalink)  
Old 03-08-2012, 05:44 PM
Tephloncat's Avatar
Premium Member
 
First Name: Cody
My Rhino: 2005 Rhino 660 Camo
Join Date: Feb 2012
Location: Blue Ridge, TX
Posts: 181
View Tephloncat's Photo Gallery(0) Send a message via Yahoo to Tephloncat
I want to take a look at what you have but your website is down.
__________________
2005 Rhino 660 Camo, Teryx Shocks, 28" Silverbacks (FATS), Blackrhino CDI, 3" Intake Snorkel, 165 Main and 47.5 pilot Jets, Warn RT25, Full Skid Plate set, JBS primary, 14 gram OD weights, Purple Secondary Spring, and more.

Thanks JBS and Rutting Rhino...
Reply With Quote
  #15 (permalink)  
Old 03-08-2012, 06:11 PM
RuttingRhino's Avatar
Senior Member
 
First Name: Craig
My Rhino: Red 07
Join Date: Jan 2011
Location: Tempe, AZ
Posts: 3,239
View RuttingRhino's Photo Gallery(0)
Yeah don't know when we will be back up on the website...for now we are doing business by paypal...

You can go to our vendor section here on the forum and see pics and descriptions of the fuel kits...

If you want to order anything or have more questions just pm me your email...

RuttingRhino.com - Yamaha Rhino Forum - Rhino Forums.net

Thanks for looking...
__________________
We are closed...2013
Reply With Quote
Reply

Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > Technical > Lighting, Stereo, and Electrical


Search tags for this page
2005 yamaha rhino cdi
,

best cdi box for rhino 660

,

best cdi for rhino 660

,
best cdi for yamaha rhino 660
,
best cdi yamaha rhino
,
best rhino 660 cdi
,
dynatek cdi for yamaha rhino 660
,

dynatek cdi rhino 660

,
moose best cdi for 660 rhino
,
rhino dynatek cdi
,
what is the best cdi for rhino 660
,
what is the best cdi for yamaha rhino
,

yamaha rhino 660 cdi

,
yamaha rhino best cdi
,

yamaha rhino cdi

Click on a term to search our sites for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 06:52 PM.


RhinoForums.net is not associated with Yamaha in any way. We are an enthusiast site dedicated to the Yamaha Rhino. Our goal is to offer a place for Yamaha Rhino owners to discuss rides, events, mods, maintenance, purchasing, etc and offer help and assistance.