Yamaha Rhino Forum

Painting

This is a discussion on Painting within the How-To forums, part of the General Rhino category; Hey guys, I bought my 06 660 about a month ago and have pulled it apart for paint. First I Scuffed all the panels with ...


Go Back   Yamaha Rhino Forum - Rhino Forums.net > General Rhino > How-To

How-To For Modifications, Bolt-Ons, Maintenance and Troubleshooting How-To's - Pictures make it better!

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09-30-2010, 08:44 AM
Member
 
First Name: Kenny
My Rhino: 2006 Rhino 660
Join Date: Aug 2010
Location: Lemoore, Ca
Posts: 96
View project94's Photo Gallery(0)
Painting

Hey guys, I bought my 06 660 about a month ago and have pulled it apart for paint.

First I Scuffed all the panels with a wet red scotch brite and scuffing paste.

Next I feathered out the smaller scratches with 320 and the bigger ones took a little putty.

I wiped them all down with wax and grease remover.

Then I used SEM's adhesion promoter.

You only have 30 minutes after you use the adhesion promoter, but then i primered all the pieces with Valspar's plastic primer.

Then i blocked it all out with 400 and then 600, I used a grey scotch brite for everything i couldn't get with the sandpaper.

Then I wiped it down again and sprayed my basecoat clearcoat.

I'm going to have to block the clearcoat with 800 and then do the flames and clearcoat.

then I'm going to block it again and stripe it and clear coat it and then cut and polish. These are the only pics I have right now.
Attached Thumbnails
Painting-0929001520a-1-.jpg   Painting-downsized_0929001520-1-.jpg   Painting-downsized_0929001521-1-.jpg  
Reply With Quote
Sponsored Links
RhinoForums.net is the premier Yamaha Rhino UTV/ATV Forum on the internet. Registered Users do not see these ads. Please Register - It's Free!
  #2 (permalink)  
Old 10-03-2010, 05:05 PM
Member
 
First Name: Kenny
My Rhino: 2006 Rhino 660
Join Date: Aug 2010
Location: Lemoore, Ca
Posts: 96
View project94's Photo Gallery(0)
Scuffed ready to lay out flames
Attached Thumbnails
Painting-downsized_1002001531.jpg   Painting-downsized_1002001532.jpg  
Reply With Quote
  #3 (permalink)  
Old 10-03-2010, 06:50 PM
THE ONE's Avatar
Official Site Vendor
Premium Member
 
First Name: tony
My Rhino: 07 660
Join Date: Jan 2007
Posts: 2,489
View THE ONE's Photo Gallery(0)
You made A lot of extra work for yourself.. Unless they were trashed to begin with.. You can 800,grey and go to town..

http://www.rhinoforums.net/members/t...ity-paint.html
__________________
Tony Schumacher, Maricopa Real Estate
Reply With Quote
  #4 (permalink)  
Old 10-03-2010, 07:25 PM
Craig's Avatar
Member
 
First Name: Craig
My Rhino: 07 693-Rhino
Join Date: Jan 2008
Location: Monument CO
Posts: 231
View Craig's Photo Gallery(0)
Its going to look good, keep us updated.
__________________
07-693 Rhino, Web Camshaft, Black Rhino CDI, 14 Gram OD, Orange Spring, AFE air system, CRAP GIBSON exhaust, Big Horns ITP wheels.
Reply With Quote
  #5 (permalink)  
Old 10-03-2010, 07:45 PM
rhinonut's Avatar
Camshaw is a giant Q-tip!!!
 
First Name: Jimmy
My Rhino: Tatum
Join Date: May 2008
Location: Flagstaff, AZ.
Posts: 6,907
View rhinonut's Photo Gallery(24)
Quote: Originally Posted by THE ONE View Post
You made A lot of extra work for yourself.. Unless they were trashed to begin with.. You can 800,grey and go to town..

Yamaha Rhino Forum - Rhino Forums.net - THE ONE's Album: trinity paint
Are you still doing paint Tony?
__________________
Reply With Quote
  #6 (permalink)  
Old 10-03-2010, 07:58 PM
THE ONE's Avatar
Official Site Vendor
Premium Member
 
First Name: tony
My Rhino: 07 660
Join Date: Jan 2007
Posts: 2,489
View THE ONE's Photo Gallery(0)
Quote: Originally Posted by rhinonut View Post
Quote: Originally Posted by THE ONE View Post
You made A lot of extra work for yourself.. Unless they were trashed to begin with.. You can 800,grey and go to town..

Yamaha Rhino Forum - Rhino Forums.net - THE ONE's Album: trinity paint
Are you still doing paint Tony?
Yes, but not full-time.. I just thought of my best paint job last week(I think anyway)... Should be done for Halloween.
__________________
Tony Schumacher, Maricopa Real Estate
Reply With Quote
  #7 (permalink)  
Old 10-04-2010, 08:23 AM
Member
 
First Name: Kenny
My Rhino: 2006 Rhino 660
Join Date: Aug 2010
Location: Lemoore, Ca
Posts: 96
View project94's Photo Gallery(0)
Yeah I was going to just scuff them and shoot them but the hood and bedsides needed some work, deep scratches and everyone told me it would be better to primer all of the panels first so i just did it.
Reply With Quote
  #8 (permalink)  
Old 10-04-2010, 09:22 AM
THE ONE's Avatar
Official Site Vendor
Premium Member
 
First Name: tony
My Rhino: 07 660
Join Date: Jan 2007
Posts: 2,489
View THE ONE's Photo Gallery(0)
Quote: Originally Posted by project94 View Post
Yeah I was going to just scuff them and shoot them but the hood and bedsides needed some work, deep scratches and everyone told me it would be better to primer all of the panels first so i just did it.
Tell em they are WRONG.. The rhino plastic is automotive quality pp grade. Only primer what you have to.. Lets see it done..

Good luck!!
__________________
Tony Schumacher, Maricopa Real Estate
Reply With Quote
  #9 (permalink)  
Old 10-04-2010, 07:19 PM
thundercat99's Avatar
Member
 
First Name: Steve
My Rhino: 2006 Rhino 660
Join Date: Nov 2009
Location: Arizona
Posts: 986
View thundercat99's Photo Gallery(5)
Looking good, pls update this thread when your all finished.
__________________
S-O-L-D !!!!!
Reply With Quote
  #10 (permalink)  
Old 10-04-2010, 07:28 PM
rhinonut's Avatar
Camshaw is a giant Q-tip!!!
 
First Name: Jimmy
My Rhino: Tatum
Join Date: May 2008
Location: Flagstaff, AZ.
Posts: 6,907
View rhinonut's Photo Gallery(24)
Quote: Originally Posted by THE ONE View Post
Quote: Originally Posted by project94 View Post
Yeah I was going to just scuff them and shoot them but the hood and bedsides needed some work, deep scratches and everyone told me it would be better to primer all of the panels first so i just did it.
Tell em they are WRONG.. The rhino plastic is automotive quality pp grade. Only primer what you have to.. Lets see it done..

Good luck!!
Don;t mean to Hi-jack but what are your paint jobs going for now Tony? I'm still looking for something custom on my 9 pieces including roof.
__________________
Reply With Quote
Reply

Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > General Rhino > How-To


Search tags for this page
05 yamaha rhino 660 paint
,
any luck painting your yamaha rhino
,

grey rhino boat paint

,
how to paint a rhino 660
,
painting a rhino 660
,

painting a yamaha rhino

,
painting rhino 660
,

painting yamaha rhino

,
painting yamaha rhino 660
,
rhino 660 paint
,
rhino 660 painting
,
rhino forum 660 painting
,
yahama rhino painting
,

yamaha rhino paint

,

yamaha rhino paint jobs

Click on a term to search our sites for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 08:16 AM.


RhinoForums.net is not associated with Yamaha in any way. We are an enthusiast site dedicated to the Yamaha Rhino. Our goal is to offer a place for Yamaha Rhino owners to discuss rides, events, mods, maintenance, purchasing, etc and offer help and assistance.