Yamaha Rhino Forum

Rhino lining your plastics

This is a discussion on Rhino lining your plastics within the How-To forums, part of the General Rhino category; Anyone who has rhino lined there plastics are you taking them and having them sprayed by a professional rhino liner company or can you use ...


Go Back   Yamaha Rhino Forum - Rhino Forums.net > General Rhino > How-To

How-To For Modifications, Bolt-Ons, Maintenance and Troubleshooting How-To's - Pictures make it better!

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 03-14-2008, 03:32 PM
loanshark's Avatar
Bomb Squad
Premium Member
 
First Name: Danny
My Rhino: 2006SE
Join Date: Nov 2007
Location: Costa Mesa
Posts: 289
View loanshark's Photo Gallery(0) Send a message via Yahoo to loanshark
Rhino lining your plastics

Anyone who has rhino lined there plastics are you taking them and having them sprayed by a professional rhino liner company or can you use the bed liner stuff you can get at home depot.

Has anyone used the bed liner stuff you get at home depot??

If so can you post a pic for me, and let me know how it is holding up.

And if you have used the bed liner stuff from home depot how easy was it to do??? Is it a spray one or a roll on??

Thanks so much for your input,

Loanshark
Reply With Quote
Sponsored Links
RhinoForums.net is the premier Yamaha Rhino UTV/ATV Forum on the internet. Registered Users do not see these ads. Please Register - It's Free!
  #2 (permalink)  
Old 03-15-2008, 04:24 PM
frog's Avatar
Member
 
First Name: KC
Join Date: Feb 2008
Location: Arlington, WA
Posts: 43
View frog's Photo Gallery(0)
hey, I sprayed my plastic with the duplicolor truck bed coating from schucks,wallmart, auto zone, and fred meyers just to name a few, but that stuff sucks, was not durable at all. Then I did the dreded and stripped it off. Then I used 60 & 100 grit sand paper and scuffed up the entire plastic surface, Then cleaned the plastic with brakleen to make sure its clean and there is no gloss left on the plastic at all, ( spray the brakleen on a rag, not dirrectly on the plastic, Brakleen eats most plastics if left on to long). Then, I got it off ebay and I think it was called Xtrem truck bed coating, I sprayed my plastic with that, it is a 2 part, And it has held up pretty good, the only issue I have had is I rolled my rhino and the hood flexed alot and it cracked and some came off, but that was a easy touch up. The best one I used, was Rattle gaurd truck bed coating that I bought off ebay, and I did a friends with that, and it seems to be the most durable.
KC
Reply With Quote
  #3 (permalink)  
Old 03-15-2008, 04:50 PM
07fj's Avatar
Rainman
Premium Member
 
First Name: rog
My Rhino: 07 660 Sport
Join Date: Oct 2007
Location: Ramona, Ca
Posts: 6,806
View 07fj's Photo Gallery(1)
I used the spray on stuff from Kragen in my batt box on the M/H and it never seemed to harden well, protects from acid though. LOL

Rog
__________________


LOORRS Rookie of the Year
Unlimited UTV 2009

Benchmark 686, (67.6 RWHP )
HRT Motorsports cage, LSR XTR 6.5
Rugged RRP600
www.unleashedutv.com
Reply With Quote
  #4 (permalink)  
Old 03-15-2008, 05:49 PM
mosslager's Avatar
Senior Member
 
My Rhino: 2007 660 SE
Join Date: Sep 2007
Location: OC
Posts: 1,482
View mosslager's Photo Gallery(3)
I just had my truck done at Line-x and asked for a quote on the Rhino. The guy said they haven't had good luck getting it to adhere to plastic well. He said the whole pice needs to be shot to totally 100% cover plastic. That way the Line-x actually bonds to itself. He showed me some plastic chairs they did and it was flaking off for an example. To do 100% (both sides) would add a lot of weight to a Rhino and make it about impossible to line all the holes for the bed and dash back up. I did see one at the San Sports Super Show that was Line-x'd but it was fresh out of the spray booth, so it explains why it looked good with no flaking I suppose.
__________________
Reply With Quote
  #5 (permalink)  
Old 03-17-2008, 11:11 AM
loanshark's Avatar
Bomb Squad
Premium Member
 
First Name: Danny
My Rhino: 2006SE
Join Date: Nov 2007
Location: Costa Mesa
Posts: 289
View loanshark's Photo Gallery(0) Send a message via Yahoo to loanshark
So, then it might not be such a good idea!!!!

How about anyone that is painting there plastics with a rattle can???

Are they holding up good, or is it a waiste also??

Thanks for your replies,

Loanshark
Reply With Quote
  #6 (permalink)  
Old 03-17-2008, 11:22 AM
frog's Avatar
Member
 
First Name: KC
Join Date: Feb 2008
Location: Arlington, WA
Posts: 43
View frog's Photo Gallery(0)
I haVe had my plastics done for over a year now and the only crack or blemish is where I rolled it and the plastic flexed alot, other than that it is ok.
Reply With Quote
  #7 (permalink)  
Old 03-17-2008, 11:24 AM
loanshark's Avatar
Bomb Squad
Premium Member
 
First Name: Danny
My Rhino: 2006SE
Join Date: Nov 2007
Location: Costa Mesa
Posts: 289
View loanshark's Photo Gallery(0) Send a message via Yahoo to loanshark
Frog, are you talking rhino lined plastic. or are you talking rattle can????
Reply With Quote
  #8 (permalink)  
Old 03-17-2008, 11:45 AM
frog's Avatar
Member
 
First Name: KC
Join Date: Feb 2008
Location: Arlington, WA
Posts: 43
View frog's Photo Gallery(0)
rhino lined
Reply With Quote
  #9 (permalink)  
Old 03-17-2008, 12:05 PM
MUDDINSQUID's Avatar
DRIVE IT LIKE YOU STOLE IT!!
 
First Name: RICK
My Rhino: 2005 RHINO
Join Date: Nov 2007
Location: BELFAIR, WASHINGTON
Posts: 177
View MUDDINSQUID's Photo Gallery(0) Send a message via Yahoo to MUDDINSQUID
I have used the new Fusion rattle can at wal-mart it seems to do very well so far. It is about 5.50 a can as long as you clean the plastics real good it seems so far to do very well. It is flexible as well as pretty duarable, the color choices arent the best but are OK. thanks Rick
__________________
2005 Rhino 660
BRP Stage 2 CDI
ITP Wheels 26" MUD KINGS
44MM CARB
HIGH DOME HIGH COMP PISTON
2004 GRIZZLY 660
2000 KODIAK 400
Reply With Quote
Reply

Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > General Rhino > How-To


Search tags for this page
bed armor be put on plastic
,
can rhino liner be sprayed on plastic
,
can you put bed liner on plastic
,
can you put rhino liner on plastic
,

can you rhino line plastic

,
can you rhino liner plastic
,
can you ryno line plastic
,
does bed will rhino liner stick to plastic
,
does rhino liner stick to plastic
,
how to apply bed liner paint on plastic
,
how to rhino line plastic
,
rhino liner on plastic
,
spray liner on plastic
,
will bedliner stick to plastic
,

will rhino liner stick to plastic

Click on a term to search our sites for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 12:27 AM.


RhinoForums.net is not associated with Yamaha in any way. We are an enthusiast site dedicated to the Yamaha Rhino. Our goal is to offer a place for Yamaha Rhino owners to discuss rides, events, mods, maintenance, purchasing, etc and offer help and assistance.