storage bags and boxes - Yamaha Rhino Forum - Rhino Forums.net
General Rhino Discussion For General Rhino Discussion

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 24 (permalink) Old 03-21-2009, 02:56 PM Thread Starter
Moon Shiner
 
CanadianViking's Avatar
 
Join Date: Sep 2007
Location: Calgary, Alberta Canada
Posts: 174
storage bags and boxes

Like many Rhino owners, I tend to carry alot of gear with me (most of it needed for safe travel in the mountains). On my 06 Rhino 660 I had the underhood storage box, under seat storage box and a mastercraft v-bag all for gear storage. Now that I'm fitting up my new 09 Rhino, I need to find storage options for my gear (tools, survival equipment). The underhood box is no go on the 09 so that leaves me with underseat and v-bag storage (I need to leave the dump box mostly free as I usually have two dogs riding with me). So, I would appreciate some suggestions for a good underseat storage box and a v-bag (both need to fit the 09 700 - I don't think the stuff I had on my 06 660 would properly fit on the 700).

Thanks for your input!

CanadianViking
2009 Rhino 700 "Red Midnight" SPEDD
CanadianViking is offline  
Sponsored Links
Advertisement
 
post #2 of 24 (permalink) Old 03-21-2009, 03:45 PM
Sunday Driver
 
twon89's Avatar
 
Join Date: Nov 2008
Location: Tulare CA
Posts: 44
I know you said you want to keep you're bed clear but I've seen a tool kit that fit on the inside of tail gate an look good. I think it was Hunterworks our cabelas. Sorry it's on sidexsidesports.com under Yamaha rhino then go to acc.

Last edited by twon89; 03-21-2009 at 03:58 PM.
twon89 is offline  
post #3 of 24 (permalink) Old 03-21-2009, 04:46 PM
Moon Shiner
 
Join Date: May 2008
Posts: 161
I made an underseat storage bin from a rubbermaid 12gal garbage bin.$16.97 at walmart or crappy tire.There are pics of it under my post
09 camo rhino with accessories
savagecanuck is offline  
Sponsored Links
Advertisement
 
post #4 of 24 (permalink) Old 03-21-2009, 07:29 PM
Roosted
 
Jonesntn's Avatar
 
Join Date: Jul 2008
Location: Jackson, Tn
Posts: 135
Have you thought about getting a hood rack?
Jonesntn is offline  
post #5 of 24 (permalink) Old 03-21-2009, 07:47 PM
Oil Spot
 
Join Date: Jan 2009
Location: Colorado
Posts: 21
Hood racks work great, good call.
no-ruff-2-tuff is offline  
post #6 of 24 (permalink) Old 03-21-2009, 07:48 PM
Puddle Jumper
 
hobbes442's Avatar
 
Join Date: Nov 2007
Location: Mount Vernon,Indiana
Posts: 178
rubbermaid latchables 19qt it is 16.7" by 11" by 10.8in. slides in under seat. you have to put in in toward front first and then it slides in nicely and has lid that latches both sides . i think less than $10 at walmart.

2007 660 rhino, Muzzy Dual Exhaust,Greaseless Roller weights from HW
Hunterworks tri fire cdi & sheave, Progressive Shocks
Simpson D3 5 point Harness, SideXSide HID lights
rock hard ATV harness bar
ITP SS106 with Bighorns- Viper 4000 Winch
Specialties Concours Dash panel
Trail Logic skids,HW fender skids
ETON ROVER-too cool
hobbes442 is offline  
post #7 of 24 (permalink) Old 03-22-2009, 10:42 AM
Couch Potato
 
True Blue's Avatar
 
Join Date: Mar 2009
Posts: 5
Canadian Tire for $16.00


Place bin into hole and score around the metal frame then leave about
1 1/2" above this and cut out with tin snips. Then cut down the four corners and take a heat gun to form the edge lip.

TB
Attached Thumbnails
Click image for larger version

Name:	Storage 1.JPG
Views:	2366
Size:	212.2 KB
ID:	13424   Click image for larger version

Name:	Storage 2.JPG
Views:	597
Size:	140.4 KB
ID:	13425  
True Blue is offline  
post #8 of 24 (permalink) Old 03-22-2009, 12:13 PM
Mountaineer
 
underdog's Avatar
 
Join Date: Mar 2007
Location: NE Tennessee
Posts: 335
There is also a rack that hangs off the back of the stock roll cage.
I cannot find it now.
Looked expensive / heavy / will raise center of gravity.
But looks like a good way to add storage area to me.
Should be able to fab up something like that yourself.

06 exploring edition 660 Rhino
Nobody is perfect i am a perfect example
underdog is offline  
post #9 of 24 (permalink) Old 03-22-2009, 01:07 PM
Wholigan
 
moto92's Avatar
 
Join Date: Jul 2008
Location: Mt. Vernon, IL
Posts: 1,027
good work there true blue.
that would be perfect but it needs a good water tight lid, i would have it full of mud and water.
moto92 is offline  
post #10 of 24 (permalink) Old 03-22-2009, 03:32 PM
Couch Potato
 
True Blue's Avatar
 
Join Date: Mar 2009
Posts: 5
Moto92

Man that will be deep water and you better be wearing a wet suit ?



TB
True Blue is offline  
post #11 of 24 (permalink) Old 03-22-2009, 03:36 PM
Moon Shiner
 
Join Date: May 2008
Posts: 161
Laughing

Quote:
Originally Posted by True Blue View Post
Canadian Tire for $16.00


Place bin into hole and score around the metal frame then leave about
1 1/2" above this and cut out with tin snips. Then cut down the four corners and take a heat gun to form the edge lip.

TB
Us cheap canucks think alike I did same except left a full side on and bent it over to form a lid.Not water tight but I don't plan on going deep enought to get my ass wet either
savagecanuck is offline  
post #12 of 24 (permalink) Old 03-22-2009, 05:49 PM
Cannon Ball
 
grunt's Avatar
 
Join Date: Mar 2008
Location: North Idaho
Posts: 680
I've got both a hood rack and safari rack..leaves my bed free. I normally only use the hood rack during hunting season/winter
Attached Thumbnails
Click image for larger version

Name:	SANY0487.jpg
Views:	572
Size:	74.3 KB
ID:	13436  

'nuff said



With age comes a cage
grunt is offline  
post #13 of 24 (permalink) Old 03-22-2009, 06:10 PM
Speed Demon
 
Landscaper's Avatar
 
Join Date: Dec 2007
Location: Minnesota
Posts: 589
i also have a safari rack that i built myself and i like it, it is only holding my snow shovels now....

-RANGER RECOVERY VEHICLE-
2007 Camo 660
-Yamaha Doors
-Yamaha Full Windshield
-Yamaha Camo Seat covers
-Yamaha 08 Cupholder
-Tri-Fire CDI
2000 Gator 6x4
Landscaper is offline  
post #14 of 24 (permalink) Old 03-22-2009, 08:55 PM
Rocket
 
Join Date: Oct 2008
Location: central P.A.
Posts: 852
i took the cargo not out of the trunk of a newer chevy impalla. it fits nice in between the rollbars. it will hold a lot of crap. if i could figure out how to post pictures i would show you. i think it would great for you. if you would really like to look at it i could send you a picture in a text. or maby an email.
jerry from PA is offline  
post #15 of 24 (permalink) Old 03-23-2009, 03:09 PM
Oil Spot
 
Join Date: Oct 2008
Posts: 28
Quote:
Originally Posted by grunt View Post
I've got both a hood rack and safari rack..leaves my bed free. I normally only use the hood rack during hunting season/winter
Did you make the rear one? Anymore pics, I want to fab one up like that.
toddb is offline  
Reply

  Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > General Rhino > General Rhino Discussion

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Rhino Forum - Rhino Forums.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome