Yamaha Rhino Forum - Rhino Forums.net

Anyone lowered thier seats?? Lookn 4 exmpls

666rhino — Fri, 03 Sep 2010 05:32:42 GMT

I have a metal shop, and a bit of mtl fab experience(not a pro,but good), and I 'm gettin ready to make my 2nd rollcage but i wanna drop the seats,therfore lowercage,cntr of gravity,ect...has anybody already done this, and (I know its a longshot) do you have any old draw-ups/plans. before i do it i'd like to see someone elses so i dont learn the "hardway"
Any advice,tips,ideas or input is greatly appreciated. Thank U for your time:think:

2009 Rhino 700EFI for sale

Wicked93 — Fri, 03 Sep 2010 04:18:44 GMT

Selling my 2009 Yamaha Rhino 700, has 449 miles and 42.5 hours. The following cosmetic mods have been done, Maier White Carbon Fiber Hood, Bed, Side Panels, Dash, Glove Box, ITP Chrome 14"Rims with ITP Terracross tires. the following performance mods are DMC Dual Exhaust, Black Rhino ECU, AFE Cold Air. I am asking $ 9,850.00
(503) 435-9183 Live in McMinnville Oregon

Attached Images

	photorr1.JPG (318.8 KB)
	photorr2.JPG (299.1 KB)
	photorr3.JPG (289.5 KB)

OK school me on this clutch set up...

Garceau — Fri, 03 Sep 2010 01:58:33 GMT

...or point me to a really good link.

Im very familiar with a snowmobile type set up. But from what I read here they sound pretty different although they run off the same principle.

Whats the difference between wet and dry set up?

We have machined sheaves in sleds too, but I hear you cant run OD weights with them here, obviously this is a difference, as our weights are on the primary in the sleds.

Just curious to learn and truly understand my machine before I start making changes. I like to know why a particular change does what it does.

Here are some of my other toys, so as you can see.....I love fast stuff

You Tube

Me racing on Pinks in San Antonio a few years ago....I am the faster one - LOL

You Tube

ASA news letter September 2010

zoomer — Fri, 03 Sep 2010 01:37:12 GMT

http://www.americansandassociation.o.../currentnl.pdf

14 x 6 Trailer

BaileyAZ — Fri, 03 Sep 2010 01:18:03 GMT

I have a 14 X 6 Play Craft trailer with metal floor, rolling tongue jack, tail light gaurds, spare tire, and ramps that I no longer need. Located in Phoenix area. Asking $1050.

Attached Images

	IMG_0004.JPG (120.4 KB)
	IMG_0006.JPG (119.3 KB)
	IMG_0007.JPG (141.5 KB)

Need help 2006 rhino dieing

codynutts — Fri, 03 Sep 2010 00:26:16 GMT

I have a 2006 rhino 660, when driving in high gear it seems like it starves for fuel after about 25mph. about 25mph it will kill itsself and then dies but will start right back up. Its not the reverse sensor switch casue i fixed that already. And doesnt die in low gear at all. Does any body have any ideas...... dirty carb? bad fuel pump..... let me know thanks cody

Grease Less 450 Videos..

UTV Inc. — Thu, 02 Sep 2010 23:30:03 GMT

cruising youtube and i found these:

PART 1:

You Tube

PART 2:

You Tube

God Bless Our Military

speeedr — Thu, 02 Sep 2010 23:06:48 GMT

"Except For Ending Slavery, Fascism, Nazism and Communism, WAR has Never Solved Anything."

" U.S. Marines - Certified Counselors to the 72 Virgins Dating Club."

" U.S. Air Force - Travel Agents To Allah"

"Stop Global Whining"

"When In Doubt, Empty The Magazine"

Naval Corollary: Dead Men Don't Testify.

"The Marine Corps - When It Absolutely, Positively Has To Be Destroyed Overnight"

"Death Smiles At Everyone - Marines Smile Back"

"Marine Sniper - You can run, but you'll just die tired!"

"What Do I Feel When I Kill A Terrorist? A Little Recoil"

"Marines - Providing Enemies of America an Opportunity To Die For their Country Since 1775"

"Life, Liberty and the Pursuit of Anyone Who Threatens It"

"Happiness Is A Belt-Fed Weapon"

"It's God's Job to Forgive Bin Laden - It's Our Job To Arrange The Meeting"

"Artillery Brings Dignity to What Would Otherwise Be Just A Vulgar Brawl"

"One Shot, Twelve Kills - U.S. Naval Gun Fire Support"

"My Kid Fought In Iraq So Your Kid Can Party In College"

"Machine Gunners - Accuracy By Volume"

"A Dead Enemy Is A Peaceful Enemy - Blessed Be The Peacemakers"

"If You Can Read This, Thank A Teacher.. If You Can Read It In English, Thank A Veteran"

04 660 big bore 686 would like a quiter full exhaust

castone001 — Thu, 02 Sep 2010 20:22:20 GMT

Folks,

new to this forum.

I recently aquired an 04 660 race style (no bed) with a 686 big bore complete rebuild. Runs great jsut a little loud for my taste. Its a single DMC and I think its a slipon or?? The head pipe(s) look stock to me.

Is there a good performance exhaust system for 660's that are quieter than the race full flow systems without power loss?

Thanks in advance!

Attached Images

Rhino Drivers Side 01.jpg (297.1 KB)

I'm Registered in NY!

Harry Comes — Thu, 02 Sep 2010 20:17:18 GMT

I had to go to DMV and register my toyhauler. I figured while I was there, I'd play dumb and try and have them register the Rhino. For those who don't know, NYS doesn't consider the Rhino an ATV because it it over 1000lbs. I went in with my cert of origin and my orignal paperwork from when I bought it in 2007. Everything was going swimingly until she put in the weight off the title into the computer. It wouldn't allow her to process it with the weight over 1000lbs. I played dumb and asked her if she could put the weight under 1000lbs and see if it would go through. She wouldn't do it. So I ended up going to a different DMV, without my Cert of Origin. I brought along a photo of the vin, and a declaration of ownership form. I put the weight on the reg. application as 990lbs. They clerk put it right through no problems and issued me a 1 year reg. and plate to mount on the rhino.:banana:

I'm going to go test it out this weekend up at Tug Hill and see if I have any problems.

carb and intake question

panteramatt — Thu, 02 Sep 2010 16:55:49 GMT

Has anyone built an intake for the 660? I have a intake from a 250r thats pretty big and a couple from a 400ex. Wondering if it will make good velocity or could I use some exhaust pipe or pvc? Also, is a fcr41 a good power upgrade? I know i tshould give a lot of throttle response but would it increase power since its actually smaller than the stock one? Also, if I use one from a quad, can the stock choke be used?

shipping question

Rotaxxx — Thu, 02 Sep 2010 16:07:25 GMT

I was on your website and was thinking about ordering some stuff but wasnt too sure if you ship to Canada and how much you charge to ship here?

couple od weights ?'s

panteramatt — Thu, 02 Sep 2010 15:32:36 GMT

After searching Ive decided to go with some od weights for my 06 rhino.

1. I have stock tires and rims and will eventually put some 26's on. What weight should I go with?

2. Whos got the best deal? Anyone grind them when you buy them?

3. Is there anything else I need to purchase with the swaP to greaseless? Im goin to put a .05 shim in there.

08 700 Emergency Brake Sticking

RuralJersey — Thu, 02 Sep 2010 13:38:07 GMT

I have about 2,300 miles on my Rhino 700 and I replaced all 5 sets of brake pads about 300 miles ago and yesterday the emergency brake stuck in the on position. I hit it with wd40 and was able was able to get the lever that the cable attaches to moving again but thinking back now there were some times recently went it felt like something was dragging. It also looks like my new pads are pretty worn and I'll have to put her up on the lift and adjust the ebrake again because it stopped holding now with the lever pulled all the way up. I didn't really lubricate anything when I did the replacement.

Will the Wd40 do the trick ? Anyone else have this issue or anyu suggestions ?

camo plastics for sale

jacob13mar — Thu, 02 Sep 2010 04:57:34 GMT

:azflag:Hey FELLAS LOOKING FOR A SET OF CAMO PLASTICS IN OR AROUND AZ ANYBODY HAVE A SET LAYING AROUND SHOOT ME A PM THANKS