Yamaha Rhino Forum

Rhino Won't Run

This is a discussion on Rhino Won't Run within the Engine forums, part of the Technical category; Like a dumb ***I let the rhino sit all summer. I took it out last week and it will start and idle but when you ...


Go Back   Yamaha Rhino Forum - Rhino Forums.net > Technical > Engine
Reload this Page Rhino Won't Run
Register Home Forum Active Topics Photo Gallery Members List Social Groups Search Today's Posts Mark Forums Read

Engine For discussion of engine performance, and maintenance

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12-01-2009, 09:58 AM
Rhinofyr's Avatar
Member
  
First Name: Jason
My Rhino: 2007 660
Join Date: Nov 2007
Location: So.Cal.
Posts: 91
View Rhinofyr's Photo Gallery(0)
Rhino Won't Run
Like a dumb ***I let the rhino sit all summer. I took it out last week and it will start and idle but when you give it gas it dies. I changed the fuel filter. I"m guessing one of the jets might be gummed up? I pulled the carb to try and take it apart to clean. I'm assuming pilot jet? Tried to pull the bowl off the bottom and two of the screws came out the other two stripped the phillips head instantly. So I sprayed a bunch of carb cleaner in it put it back together and it still doesn't run. Never got to the jets. Any clues?
Reply With Quote
Sponsored Links
RhinoForums.net is the premier Yamaha Rhino UTV/ATV Forum on the internet. Registered Users do not see these ads. Please Register - It's Free!
  #2 (permalink)  
Old 12-01-2009, 10:01 AM
western196611's Avatar
Short Member
  
First Name: Bob
My Rhino: 2008 800 rzr
Join Date: Mar 2009
Location: Central Kansas
Posts: 965
View western196611's Photo Gallery(0)
Well you need to get to the jets. Use a vice grip on the stripped screws or grind a straight slot in them. Are you sure your pump is giving it ample fuel?
__________________
2008 Polaris Ranger RZR 800, 6" long travel kit, Rhino brand axles, Offset A-arms, Phamtom shocks, New front differential with billet cage, Super ATV 4500 pound winch.
Reply With Quote
  #3 (permalink)  
Old 12-01-2009, 10:24 AM
Rhinofyr's Avatar
Member
  
First Name: Jason
My Rhino: 2007 660
Join Date: Nov 2007
Location: So.Cal.
Posts: 91
View Rhinofyr's Photo Gallery(0)
I pulled the fuel line to see how the flow was and it seamed like it had good flow. Whats the deal with the carb screws. They stripped easy. I'll have to take my dremel and grind a slot for a straight blade.
Reply With Quote
  #4 (permalink)  
Old 12-01-2009, 10:38 AM
funk6294's Avatar
Member
  
First Name: Karl
My Rhino: 2006 SE
Join Date: Sep 2007
Location: Henderson, NV
Posts: 676
View funk6294's Photo Gallery(0)
Quote: Originally Posted by Rhinofyr View Post
I pulled the fuel line to see how the flow was and it seamed like it had good flow. Whats the deal with the carb screws. They stripped easy. I'll have to take my dremel and grind a slot for a straight blade.
I would skip the dremel and get a small set of vice grips to take out the screws. The metal used to make those fastners is pretty soft and strips easily. Once you get all the screws out, replace them with socket head bolts, this way you will not have this problem again. Also while you replacing the screws on the bowl, put new ones on the vacuum diaphram on top of the carb as well.
__________________
2006 Rhino SE, Dynatek CDI, Loony Tuned Dual Exhaust, Funk Custom Intake, Keihin FCR, SoCal Fab Long Travel, Baja Cross Tires
Reply With Quote
  #5 (permalink)  
Old 12-01-2009, 10:39 AM
western196611's Avatar
Short Member
  
First Name: Bob
My Rhino: 2008 800 rzr
Join Date: Mar 2009
Location: Central Kansas
Posts: 965
View western196611's Photo Gallery(0)
Yeah they strip real easy. When you get them out, go to the hareware store and put allen heads back in.
__________________
2008 Polaris Ranger RZR 800, 6" long travel kit, Rhino brand axles, Offset A-arms, Phamtom shocks, New front differential with billet cage, Super ATV 4500 pound winch.
Reply With Quote
  #6 (permalink)  
Old 12-01-2009, 11:17 AM
Rhinofyr's Avatar
Member
  
First Name: Jason
My Rhino: 2007 660
Join Date: Nov 2007
Location: So.Cal.
Posts: 91
View Rhinofyr's Photo Gallery(0)
Copy that on the screws. Does this sound like the problem? Gummed up jets from sitting?
Reply With Quote
  #7 (permalink)  
Old 12-01-2009, 11:20 AM
07fj's Avatar
Rainman
Premium Member
  
First Name: rog
My Rhino: 07 660 Sport
Join Date: Oct 2007
Location: Ramona, Ca
Posts: 6,830
View 07fj's Photo Gallery(1)
Quote: Originally Posted by Rhinofyr View Post
Copy that on the screws. Does this sound like the problem? Gummed up jets from sitting?
yes
__________________


LOORRS Rookie of the Year
Unlimited UTV 2009

Benchmark 686, (67.6 RWHP )
HRT Motorsports cage, LSR XTR 6.5
Rugged RRP600
www.unleashedutv.com
Reply With Quote
  #8 (permalink)  
Old 12-01-2009, 11:25 AM
Rhinofyr's Avatar
Member
  
First Name: Jason
My Rhino: 2007 660
Join Date: Nov 2007
Location: So.Cal.
Posts: 91
View Rhinofyr's Photo Gallery(0)
What up Rog. This is Jason that bought the paddles off of you last year. Copy the jets. I 'll try and get those screws out and clean the jets. Thanks.
Reply With Quote
  #9 (permalink)  
Old 12-01-2009, 12:04 PM
07fj's Avatar
Rainman
Premium Member
  
First Name: rog
My Rhino: 07 660 Sport
Join Date: Oct 2007
Location: Ramona, Ca
Posts: 6,830
View 07fj's Photo Gallery(1)
Quote: Originally Posted by Rhinofyr View Post
What up Rog. This is Jason that bought the paddles off of you last year. Copy the jets. I 'll try and get those screws out and clean the jets. Thanks.
clean everything in there. and yes I know who it is, hope all else is well with you.

Rog
__________________


LOORRS Rookie of the Year
Unlimited UTV 2009

Benchmark 686, (67.6 RWHP )
HRT Motorsports cage, LSR XTR 6.5
Rugged RRP600
www.unleashedutv.com
Reply With Quote
  #10 (permalink)  
Old 12-01-2009, 12:19 PM
Rhinofyr's Avatar
Member
  
First Name: Jason
My Rhino: 2007 660
Join Date: Nov 2007
Location: So.Cal.
Posts: 91
View Rhinofyr's Photo Gallery(0)
Ya you too. I"m going to pull it apart tomorrow when I get off and try to get it running.
Reply With Quote
  #11 (permalink)  
Old 12-01-2009, 01:51 PM
07fj's Avatar
Rainman
Premium Member
  
First Name: rog
My Rhino: 07 660 Sport
Join Date: Oct 2007
Location: Ramona, Ca
Posts: 6,830
View 07fj's Photo Gallery(1)
Quote: Originally Posted by Rhinofyr View Post
Ya you too. I"m going to pull it apart tomorrow when I get off and try to get it running.
get all the bad gas out of tank also, crank motor with fuel line off carb to "rinse" the pump.


Rog
__________________


LOORRS Rookie of the Year
Unlimited UTV 2009

Benchmark 686, (67.6 RWHP )
HRT Motorsports cage, LSR XTR 6.5
Rugged RRP600
www.unleashedutv.com
Reply With Quote
  #12 (permalink)  
Old 12-01-2009, 01:57 PM
Rhinofyr's Avatar
Member
  
First Name: Jason
My Rhino: 2007 660
Join Date: Nov 2007
Location: So.Cal.
Posts: 91
View Rhinofyr's Photo Gallery(0)
Quote: Originally Posted by 07fj View Post
Quote: Originally Posted by Rhinofyr View Post
Ya you too. I"m going to pull it apart tomorrow when I get off and try to get it running.
get all the bad gas out of tank also, crank motor with fuel line off carb to "rinse" the pump.


Rog
Copy that.
Reply With Quote
  #13 (permalink)  
Old 12-03-2009, 07:54 PM
Rhinofyr's Avatar
Member
  
First Name: Jason
My Rhino: 2007 660
Join Date: Nov 2007
Location: So.Cal.
Posts: 91
View Rhinofyr's Photo Gallery(0)
Thanks for the info to all. Tore the carb apart today cleaned the jets and replaced the fuel. Rhino runs like it should.
Reply With Quote
  #14 (permalink)  
Old 12-03-2009, 09:35 PM
Kong's Avatar
Site Supporter
Premium Member
  
My Rhino: 2008
Join Date: Aug 2007
Location: SW Colorado
Posts: 1,013
View Kong's Photo Gallery(0)
Don't forget some stabil the next time you put it up for awhile. Will solve it.
__________________
2008 700 FI
Reply With Quote
  #15 (permalink)  
Old 12-06-2009, 06:37 PM
Rhinofyr's Avatar
Member
  
First Name: Jason
My Rhino: 2007 660
Join Date: Nov 2007
Location: So.Cal.
Posts: 91
View Rhinofyr's Photo Gallery(0)
Yeah lesson learned!!!!
Reply With Quote
Reply

Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > Technical > Engine
Reload this Page Rhino Won't Run

« Previous Thread | Next Thread »

Search tags for this page

2004 rhino won`t fire

,

2004 yamaha rhino wont' idle

,

660 rhino loads up wont run

,

=2006 rhino wont take gas

,

diagnos rhino 660 wont take gas

,

let yamaha rhino sit up for two weeks and now it won't crank

,

my rhino 660 doest wont to take gas

,

my rhino idle good few mindes and dies

,

rhino 660 won't idle or take gas

,

rhino 660 wont idle

,

rhino bad gas sitting

,

running av gas in a yahama rhino

,

utv won't run

,

yamaha grizzly 80 starts and idles give gas and dies

,

yamaha rhino 660 engine noise wont run

,

yamaha rhino 660 wont run

,

yamaha rhino idels good but dies if i give it gas

,

yamaha rhino won't take gas

,

yamaha rhino wont run right

,

yamaha rhino wont take fuel

Click on a term to search our sites for related topics.

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -7. The time now is 10:01 AM.

Yamaha Rhino Forum - Rhino Forums.net RSS Feeds - Contact Us - Yamaha Rhino Forum - Rhino Forums.net - Yamaha ATV Forum - Yamaha Boat Forum - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
Copyright 2008 BrianSquared LLC