Backup Light - Yamaha Rhino Forum - Rhino Forums.net
Audio, Lighting and Electrical For discussion of lighting, stereo, and other electrical components

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 05-04-2007, 12:02 PM Thread Starter
Ripsaw
 
rockskullz's Avatar
 
Join Date: Jan 2007
Posts: 1,255
Backup Light

I just added a backup light to my Rhino but had a question wiring it. I thought someone determined there was a wire already EXISTING in the factory harness to use. This is how Yamaha is able to sell there LED light kit with the backup lights.

Anybody know which color wire it is?

ORR Project "Rhino" Complete Build-up Click Here!
rockskullz is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 05-05-2007, 04:02 PM
Belt Smoker
 
azmark's Avatar
 
Join Date: Feb 2007
Location: Phoenix, AZ
Posts: 226
Here is a link I used UTILITY OFF ROAD, I was not able to get this to work. The ground wire is the one you are talking about, it comes from the harness, but it has enough current coming through it that when connected through the relay it leaves the (R) light for reverse on when the lights are on. I used a momentary push button switch located under the center console, it is activated when I put the rhino in reverse. I can send a picture if you want.

2007 Rhino
4 seater cage by total off-road / Dynatec CDI, Water temp gauge / K & N Fresh air intake / Rhino Crap Sheave, Four Hella 500's / GPS Mount, Seizmik center console / PRP Seats, Dual Batteries / Street legal (Mirror,horn and license plate light) / ITP Off-set Rims (2+5) with 25X12X8 front and 25X12X10 rear Maxis Bighorns


Ridingarizona.com
azmark is offline  
post #3 of 9 (permalink) Old 05-06-2007, 12:01 AM
Belt Smoker
 
Bowhunter's Avatar
 
Join Date: Jan 2007
Location: Litchfield Park, AZ
Posts: 231
Send a message via MSN to Bowhunter
Quote:
Originally Posted by azmark View Post
Here is a link I used UTILITY OFF ROAD, I was not able to get this to work. The ground wire is the one you are talking about, it comes from the harness, but it has enough current coming through it that when connected through the relay it leaves the (R) light for reverse on when the lights are on. I used a momentary push button switch located under the center console, it is activated when I put the rhino in reverse. I can send a picture if you want.

The "Utility Off Road" set up looks like it would work great, But I dont know why you would want the reverse light on with the headlights only. I dont care about saving the bulb life. Hook up power to the relay for your reverse light and instead of hooking to the headlight blue go to the ignition or accessory on, then you have reverse all the time. The other two wire are fine.
Bow

06 Dodge 2500 Megacab 4X4, superchip, exhaust, intake, trueflo
07 385FS GearBox 40' Double slide
01/05 Bourget 2.5 5 seat, Turbo Subaru, Mendiola, 22"/18" travel, Fox nitrogen shocks (FOR SALE)
06 660 Rhino, Digital dash, CDI, Grant Steering wheel, Wink mirror, Full windsheild, Full cage, rear seats, XM sat, SE Wheels & spacers, Fox shocks, alarm w/remote start
Bowhunter is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 05-06-2007, 04:25 AM
Supernova
 
max powers's Avatar
 
Join Date: Feb 2007
Location: your moms house
Posts: 2,407
rhinomafia hooked my l.e.d's up, the reverse light works and the brakes work. they do however light up when the key is on, it's like a taillight on all the time. Not sure if that is right or not, but I like the idea of tailights on when I am sitting on a dune in the dark,someone will see me.

I highly recommend Chris@BenchmarkPerformance.us
760-484-0986
max powers is offline  
post #5 of 9 (permalink) Old 05-06-2007, 12:11 PM
Evil Kenevil
 
the_owl's Avatar
 
Join Date: Apr 2007
Location: Albuquerque, NM
Posts: 427
I have my LED Yamaha taillights hooked up to go on when shifting into reverse.
I also added a painless fuseblock and a couple DPDT rocker switches.
Two for two sets of HID
One for rocklights under the hood
One for a Reverse light that fit so perfect, it looks factory.

The reverse light is a Autozone cheapie with a plastic guard.
Its way bright and floods out and is aimed low.
Great for backing down a hill.







Sorry if its a thread jack

A couple UTVs and a mortgage
the_owl is offline  
post #6 of 9 (permalink) Old 05-06-2007, 12:58 PM
Evil Kenevil
 
the_owl's Avatar
 
Join Date: Apr 2007
Location: Albuquerque, NM
Posts: 427
Quote:
Originally Posted by rockskullz View Post
I just added a backup light to my Rhino but had a question wiring it. I thought someone determined there was a wire already EXISTING in the factory harness to use. This is how Yamaha is able to sell there LED light kit with the backup lights.

Anybody know which color wire it is?
I Installed the LED kit yesterday. It requires a "relay" module to be plugged in inside the battery box.
You also utilize the dummy plug thats tucked up under the tailgate where your factory tailights plug in (yellow and blue, almost in the middle).
The kit comes with a replacement dummy plus, a piggy back and the relay module for in the battery box.
I dont think its going to be easy without the relay module.

A couple UTVs and a mortgage
the_owl is offline  
post #7 of 9 (permalink) Old 01-09-2009, 12:06 PM
Mountaineer
 
rodneygt's Avatar
 
Join Date: Nov 2008
Location: SW Mississippi
Posts: 308
The pic below is where I physically installed my light. I havent wired it yet but bought a relay to wire them like in the utility off road link above. I would like to be able to also wire a switch so I could turn it on without being in reverse. How could I do that and still have it automatically come on when I put it in reverse? Is it as simple as adding an switch that bypasses the relay?

Thanks,
Rodney
Attached Thumbnails
Click image for larger version

Name:	Picture 002a.jpg
Views:	343
Size:	479.3 KB
ID:	11520  
rodneygt is offline  
post #8 of 9 (permalink) Old 01-09-2009, 12:21 PM
Fabled
 
07fj's Avatar
 
Join Date: Oct 2007
Location: Ramona, Ca
Posts: 6,804
Quote:
Originally Posted by rockskullz View Post
I just added a backup light to my Rhino but had a question wiring it. I thought someone determined there was a wire already EXISTING in the factory harness to use. This is how Yamaha is able to sell there LED light kit with the backup lights.

Anybody know which color wire it is?

I did that, I found the wire that turns on the "R" light on the dash when in reverse. I will have to look up the color or you can find it in the schematic, I did. I think light blue out of the back of Digidash????

It becomes a switched ground when in rev. so in order for me to use it, I use two leds for my backup lights and the hot from the plug in the back. had to run the newly tapped switched ground wire back to the leds and all is good. no extra switched or relays.



LOORRS Rookie of the Year
Unlimited UTV 2009

Benchmark 686, (67.6 RWHP )
HRT Motorsports cage, LSR XTR 6.5
Rugged RRP600
www.unleashedutv.com
07fj is offline  
post #9 of 9 (permalink) Old 01-10-2009, 04:31 AM
Mountaineer
 
rodneygt's Avatar
 
Join Date: Nov 2008
Location: SW Mississippi
Posts: 308
But I'm wondering if I hook-up the reverse light like in the utility off road link. UtilityOffroad.com That is - with a relay so it comes on when I put the bike in
reverse and also bypass the relay.

Can I bypass the relay with a toggle or rocker switch straight wired so I could turn the light on without being in reverse?

Most of the time, the relay option would be great but I can think of a couple of situations where I'd just like to turn it on.

Thanks Rodney

Last edited by rodneygt; 01-10-2009 at 04:37 AM.
rodneygt is offline  
Reply

  Lower Navigation
Go Back   Yamaha Rhino Forum - Rhino Forums.net > Technical > Audio, Lighting and Electrical

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Rhino Forum - Rhino Forums.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome